Jump to content
SAU Community

Recommended Posts

Not sure if correct place admin please move if needed.

Half way through a RB25DET neo into R32 swap and needing to replace the heater and other hoses.

from what i can gather the RB25DET Neo heater hoses are what i need but please correct me if i am wrong.

apart from OEM what options are out there. i have found Misc eBay ones mainly listing RB26 or R33 25
and JJR do not list a Neo kit.

Link to comment
https://www.sau.com.au/forums/topic/473290-rb25det-neo-heater-hoses/
Share on other sites

I don't remember the details, but I just cut the R32 ones and used size-changing joiners to connect them to the appropriate points on the back end of the inlet manifold/water log stuff.  The R32/RB20 stuff is different sized to the R34/Neo hoses, so you can't just get Neo hoses and use them (and they go to the wrong spot on the firewall anyway, I think).

This is the list of numbers I used for replacing all of the rubber hoses in my engine bay, I added some metal pipes in there too, you can ignore those.

K5qAzpE.png

I used this website/diagram to get part codes/numbers

http://www.jp-carparts.com/nissan/partlist.php?maker=nissan&type=81&cartype=12&fig=211

Hope this helps!

  • Thanks 1

First image is original R32 heater hoses coming out of firewall and going behind head.  Note that the RB25DET Neo steel heater pipes have been removed from the back of the head.  (Ignore the small hose mixed up with it - it's my current attempt to stop smurf jizz spoogin all over my parking spots.

WP_20180209_11_26_01_Pro.thumb.jpg.6ceaea28724f5fbbb54432a31bba8011.jpg

Second image is same R32 heater hoses seen from other side of head.  Retains the original R32 bleeder point (just under the brake pipe you can see on lower edge of photo).  If you look down next to the clutch master, where the brake pipe bends under it, you can see the hose clamps that show where I have the size reducing joiners.  I cut the R32 hoses here, put the joiners in and also cut back the RB25 hoses coming off the head/water log/block (wherever they each came from).

WP_20180209_11_26_32_Pro.jpg.83e8ca4640dff665d8af4eb7db0fc79d.jpg

The last photo shows same thing from forward of the clutch master.  The bit of heater hose with the dried green smurf spoof is the RB25 heater hose and you can see its hose clamp onto the engine side connection behind that bit of loom.

WP_20180209_11_26_45_Pro.jpg.8517831ddec3cf4d94c0a0a92bd90bf4.jpg

 

  • 2 weeks later...
14 minutes ago, GeeDog said:

Did you get this sorted? I've found the body side heater hoses off my R33, and I'm in Adelaide. They are 19mm / 3/4" ID, and appear to be in good condition. Removed cause track car.

20180219_180426.thumb.jpg.52d74c1e362a353499c680fd107e4bdc.jpg

I went away so this is still a future me problem. 

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...