Jump to content
SAU Community

Recommended Posts

Hi all, I'm new here.  Prior posts have been very helpful on other topics, but I can't find much about this.  I bought a 1991 (series 2) R32 GT-R with a factory steering wheel with airbag.  I have some concerns since the airbag is 27 years old, and because it's ugly.  

image.png.8be2cb76f9892b5effbe255faae5f8eb.png

Fist of all, does anyone know about the quality / safety of these airbags?  Do these early airbags have a lifespan?  Do you think it's safer to keep it active or unplug it?  Also, does anyone know if the R32 had an airbag indicator or warning light?  All newer cars with airbags do, but I can't seem to find one on the R32.

What I'd really like to do is swap the R32 steering wheel for a newer one with an airbag.  Does anyone know if the R34 factory steering wheel would fit?  I would need it to work with HICAS, the horn, and the airbag.  I would love to put a R34 GT-R or GTT wheel (see below) on if everything would fit and work properly.

image.png.e1f0079db492fd328d00e64b25b8df0c.png     image.png.1084339858081c980c9e751999cc0e30.png

Thanks!

  • 1 month later...

First up, it is simply not permitted to change anything to do with airbags.  You can't swap to a different airbag wheel, probably even if it was from the same model of car (just a different trim package for example).  You would have to get an engineering certificate from a registered automotive engineer, at minimum, would be my guess, if you were to try it.  Especially if you're talking about swapping to later cars' wheels.  I would expect that you couldn't even consider swapping to later (like R34) wheels because I'm pretty sure that the HICAS steering position sensor drive is not compatible.  Not that that should be an obstacle, because anyone still with an active HICAS system on board should be kicked in the arse and shown how to defeat it, because it is pure shit.

Having said that, it's an R32 GTR.  If it's an import, and if you chose to remove the bag wheel and replace it with a non-bag wheel, then I'm sure that no-one would really be the wiser.  You just say "It was imported from Japan with no airbag, like most of the others".  And shrug, and smile and bat your eyelids and whatever it takes to make yourself look honest and naive.

As to whether the airbag itself is safe.....you'll never know unless you crash it.  It will either go off, or it won't.  If it doesn't then it's safe.  If it does, it will either protect you or it will try to kill you.  There's no telling with these really old bags how healthy they are.  The problem with the Takata bags is pretty specific to those particular bags.  But there are any number of other ways that these things could go bad.

  • 3 weeks later...
  • 6 months later...

I would leave it stock. Your car is an older car and that steering wheel came with it. Leave it as is in my opinion and modify everything else to your heart's content as the vintage steering wheel goes well with a vintage car. Just suits really well.

Edited by Robocop2310
  • 9 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...