Jump to content
SAU Community

R33 GTST major service

eVo25t

By eVo25t,
in New South Wales

 Share

Recommended Posts

JGTC Proficient

JGTC

Posted
Posted (edited)

What part of Sydney are you in?  Just had the same done for my R34 by Mark at MRC Performance & Dyno in Castle Hill, very knowledgeable with all things RB, also the best troubleshooter i've been to, he's solved many issues other repuatable workshops either caused or hadn't picked up on.

They offer a really good health-check / inspection which includes a quick run on the dyno to make sure all is in order also, mention this as it's really worth the $120 odd dollars so you know what you're up against for future mods etc.

If it helps break the ice, mention Daniel with the black R34 GTR suggested you call.

https://www.facebook.com/MRCDynoServices

Edited by JGTC
The Bogan Grand Master

The Bogan

Posted
Posted

What do you consider a major service?

If it's a basic fluids, plugs, filters type of thing invest in a good jack and some jack stands and do it yourself.

You will save thousands over time.

Nothing about it is hard.

If you cannot see yourself doing a timing belt, if that's required, any local good garage can do that, just get them to do the timing belt, water pump.

The problem with getting basic work done at "tuning shops" is that they cost alot of money, this is a fair thing though because you get what you pay for, usually, but that is really only required for their technical expertise, there is nothing technical about doing the basic service stuff.

Plus money saved can be better spent on parts, or shiny things for the missus to take her focus of the car parts that she found stashed in the garage.

Plus there is nothing more satisfying than working on your car.

Basic service parts cost around $100 - $150 dependent on parts required.

 

The Bogan Grand Master

The Bogan

Posted
Posted
14 hours ago, eVo25t said:

I'm talking timing belt, water pump, gearbox oil, diff oil and probably needs a dyno run too. I'm stuck because I moved to a unit and dont have all my stuff anymore

 

 

I've never used one but here is an option, maybe, depends on cost though.

 

https://www.diyautogarage.com.au/about/

GTofuS-T Grand Master

GTofuS-T

Posted
Posted
4 hours ago, mlr said:

I've never used one but here is an option, maybe, depends on cost though.

https://www.diyautogarage.com.au/about/

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

  • Like 1
The Bogan Grand Master

The Bogan

Posted
Posted
28 minutes ago, GTofuS-T said:

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

I would love to start up a shop like that, with a gym with only racks and free weights

Oh, and a bar

It would be just like my old garage, only without the comments of, "how long are you gonna be", "can you keep the noise down", "how much have you drunk", "do you think it's a good idea to drink and train/work on the car in the state your in".

That shit gets tiresome..

  • Haha 2
The Bogan Grand Master

The Bogan

Posted
Posted
2 hours ago, r32-25t said:

Must wear safety glasses at all times, f**k that

Only a small inconvenience.

I actually aways wear safety glasses whenever I'm under the car, usually if I got shit in my eye working under the stands my head would bounce between the floor and some part of the undercarriage at least 10 times....

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...