Jump to content
SAU Community

R33 GTST major service

eVo25t

By eVo25t,
in New South Wales

 Share

Recommended Posts

JGTC Proficient

JGTC

Posted
Posted (edited)

What part of Sydney are you in?  Just had the same done for my R34 by Mark at MRC Performance & Dyno in Castle Hill, very knowledgeable with all things RB, also the best troubleshooter i've been to, he's solved many issues other repuatable workshops either caused or hadn't picked up on.

They offer a really good health-check / inspection which includes a quick run on the dyno to make sure all is in order also, mention this as it's really worth the $120 odd dollars so you know what you're up against for future mods etc.

If it helps break the ice, mention Daniel with the black R34 GTR suggested you call.

https://www.facebook.com/MRCDynoServices

Edited by JGTC
The Bogan Grand Master

The Bogan

Posted
Posted

What do you consider a major service?

If it's a basic fluids, plugs, filters type of thing invest in a good jack and some jack stands and do it yourself.

You will save thousands over time.

Nothing about it is hard.

If you cannot see yourself doing a timing belt, if that's required, any local good garage can do that, just get them to do the timing belt, water pump.

The problem with getting basic work done at "tuning shops" is that they cost alot of money, this is a fair thing though because you get what you pay for, usually, but that is really only required for their technical expertise, there is nothing technical about doing the basic service stuff.

Plus money saved can be better spent on parts, or shiny things for the missus to take her focus of the car parts that she found stashed in the garage.

Plus there is nothing more satisfying than working on your car.

Basic service parts cost around $100 - $150 dependent on parts required.

 

The Bogan Grand Master

The Bogan

Posted
Posted
14 hours ago, eVo25t said:

I'm talking timing belt, water pump, gearbox oil, diff oil and probably needs a dyno run too. I'm stuck because I moved to a unit and dont have all my stuff anymore

 

 

I've never used one but here is an option, maybe, depends on cost though.

 

https://www.diyautogarage.com.au/about/

GTofuS-T Grand Master

GTofuS-T

Posted
Posted
4 hours ago, mlr said:

I've never used one but here is an option, maybe, depends on cost though.

https://www.diyautogarage.com.au/about/

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

  • Like 1
The Bogan Grand Master

The Bogan

Posted
Posted
28 minutes ago, GTofuS-T said:

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

I would love to start up a shop like that, with a gym with only racks and free weights

Oh, and a bar

It would be just like my old garage, only without the comments of, "how long are you gonna be", "can you keep the noise down", "how much have you drunk", "do you think it's a good idea to drink and train/work on the car in the state your in".

That shit gets tiresome..

  • Haha 2
The Bogan Grand Master

The Bogan

Posted
Posted
2 hours ago, r32-25t said:

Must wear safety glasses at all times, f**k that

Only a small inconvenience.

I actually aways wear safety glasses whenever I'm under the car, usually if I got shit in my eye working under the stands my head would bounce between the floor and some part of the undercarriage at least 10 times....

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...