Jump to content
SAU Community

Trying to remove my speed cut

StressedPoet654
 Share

Recommended Posts

StressedPoet654 Apprentice

StressedPoet654

Posted
Posted (edited)

So I've had my r32 coupe for a bit now and I want to get around the 180kph limiter. Originally the car was 25de auto but has been swapped to 25det s2 with 20det manual. It also has a z32 ecu. I've seen that disconnecting the vehicle speed sensor wire (pin 53 if I remember correctly) from the ECU can stop the limiter working (while also interfering with power steering) but this did not seem to work for me as I put in a switch to easily disconnect and reconnect it but it will still stop at 180kph regardless. I am unsure about installing a speed limit defender right now as I havent had time to do any real research into it especially with the mess of wires that goes into the ecu from all the swapped things and stuff. 

I'm really not to sure what I'm looking at and why it's not doing what it's supposed to so if anyone has some more experience and can help that would be sweet. Cheers guys.

Edited by StressedPoet654
Link to comment
https://www.sau.com.au/forums/topic/475318-trying-to-remove-my-speed-cut/
Share on other sites
StressedPoet654 Apprentice

StressedPoet654

Posted
  • Author
Posted
17 hours ago, GTSBoy said:

The correct answer is Nistune.

Might need to expand on that a little for me. I've never done anything with ecus so I dont know what to search up man.

Robocop2310 Experienced

Robocop2310

Posted
Posted
19 hours ago, StressedPoet654 said:

So I've had my r32 coupe for a bit now and I want to get around the 180kph limiter. Originally the car was 25de auto but has been swapped to 25det s2 with 20det manual. It also has a z32 ecu. I've seen that disconnecting the vehicle speed sensor wire (pin 53 if I remember correctly) from the ECU can stop the limiter working (while also interfering with power steering) but this did not seem to work for me as I put in a switch to easily disconnect and reconnect it but it will still stop at 180kph regardless. I am unsure about installing a speed limit defender right now as I havent had time to do any real research into it especially with the mess of wires that goes into the ecu from all the swapped things and stuff. 

I'm really not to sure what I'm looking at and why it's not doing what it's supposed to so if anyone has some more experience and can help that would be sweet. Cheers guys.

Mate, it’s a Nissan specific ecu module.

Nistune is a real-time tuning suite designed especially for Nissans which provides the ability to:

• Retune factory Nissan Engine Control Units (ECU)
• Monitor gauges and map tracing on your ECU
• Data log from your ECU using consult, wideband and auxiliary inputs
• Perform playback using graphs, gauges and map tracing
• Connectivity for up to two emulators simultaneously
• Loads and Saves files in regular and odd/even formats for chip burning (EPROM/FLASH)

Be sure to get one that is compatible with your engine though it’s not one fits all:

https://www.nistune.com/

 

StressedPoet654 Apprentice

StressedPoet654

Posted
  • Author
Posted
16 minutes ago, GTofuS-T said:

Wouldn't it already have to be a nistune, if it's a z32 ecu running an rb25?

I wasnt 100% on if it was nistune or not but indeed it is. I've still never done anything with an ECU but in short am I able to find somewhere who can plug in their laptop and just remove the speed limiter or is there more to it than that.

StressedPoet654 Apprentice

StressedPoet654

Posted
  • Author
Posted
24 minutes ago, GTSBoy said:

Yes.  Anyone with Nistune software and the required Consult-USB adapter can do it in about 2 minutes.  I'm dead surprised that it is still enabled!

Yeah that's one of the things that was throwing me off. I didnt expect it to still have the limiter if it was aftermarket. Cheers for the help. I'll find a place to get it done. I'd be so lost without help haha. 

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
33 minutes ago, StressedPoet654 said:

Yeah that's one of the things that was throwing me off. I didnt expect it to still have the limiter if it was aftermarket. Cheers for the help. I'll find a place to get it done. I'd be so lost without help haha. 

By default the setting is left at 180km/h for both Speed Limit 1 and 2.

 

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
4 hours ago, GTSBoy said:

And while that's true, it's usually the first or second thing that gets changed as soon as the board in booted up!

You'll be surprised at some tunes I've seen from "big shops" setup incorrectly 

StressedPoet654 Apprentice

StressedPoet654

Posted
  • Author
Posted
On 11/6/2018 at 9:27 PM, KiwiRS4T said:

Where do you live? I may be able to point you to a tuner.

Sorry for the late reply, I'm in hamilton. Going to a place I think can do some work tomorrow. Speedwell tune and service was recommended by a workmate so I'm trying there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...