Jump to content
SAU Community

Recommended Posts

On 11/21/2018 at 11:35 AM, Steve85 said:

I read good things about the original TRD Avalons, and I thought they looked pretty good too. These ones... i'm not a fan. This type of tuning seems to be the new entry level norm. I'm thinking C43 AMG etc. 

Also I think we are entering another phase of overdone styling. The amount of plastic manufacturers are putting on their cars is starting to bug me. I think 18 year old me would have liked these, 30 year old me says no.

And I'm still angry they slapped an RZ badge on a Camry. ?

35 year old me hates both! ?

1 minute ago, Steve85 said:

What is your money no object car? I can't pick you... emoji23.png

My money is...it’s a freaken Camry. Mums and grannies drove them and they last forever so stop trying to make them race spec cars! 

That’s what I meant. The Camry never was and never will turn into a race car. My uncle has a Camry Sportivo that he thinks is a special race version Camry! 

On 11/22/2018 at 10:14 AM, PranK said:
On 11/22/2018 at 10:14 AM, niZmO_Man said:
Hey there are a couple of different part numbers between the two emoji14.png

Wheels and decals.

Like my 86, or is it a BRZ, there's more Subi named bits than the couple of Toyota ones.

On topic

I would rather the Totota to any Holden or Ford if I was looking for a family sedan.

They are roomy, comfy and reliable, not bad on fuel either, and after sales service is brilliant compared to most manufacturers.

What other 4 door family hacks are people comparing it to?

As for the TRD badge, who cares, alot of manufacturers are doing it, Subaru throw on STI badges on non wrx cars for some rims and some...badges, BMW do the same with M, hell, even Mercedes are throwing on AMG badges on their big arse 4wd's.

NISMO > https://www.caranddriver.com/nissan/sentra-nismo

18tdigb-helios310c.jpg.ximg.s_12_h.smart.jpg

Car sales have been slumping hard since the mid 2000's...a lot of auto makers such as Nissan and Mitsubishi just to name a few have come close to bankruptcy in recent times so it's no wonder they are desperate to do whatever it takes to sell more cars...if slapping their Tuning House's badge on a car with some minor mods does it!

9 minutes ago, Leroy Peterson said:


Which car manufacturers? All of them? In what country?

 

Good question!

Australian Annual New Car Sales, 2008-2017

Top sales by manufacture:

Top 10 Manufacturers by year, 2014-2017

https://www.carsguide.com.au/car-advice/australian-car-market-car-sales-statistics-and-figures-70982

  • Like 1
  • Thanks 1
  • Haha 1
24 minutes ago, Leroy Peterson said:


 

 


Which car manufacturers? All of them? In what country?

 

As mentioned Nissan and Mitsubishi etc in the mid 2000’s globally.

 

1 hour ago, Robocop2310 said:

As mentioned Nissan and Mitsubishi etc in the mid 2000’s globally.

 

mid 2000's were a tough period for lots of industry but its looking pretty healthy these days.

  • Like 1
30 minutes ago, PranK said:

mid 2000's were a tough period for lots of industry but its looking pretty healthy these days.

Yep for sure much better than the mid 2000's.

Toyota/Lexus design language has been getting progressively more stupid.  Same with Honda (Civic in particular).  Massive wafflebox black plastic that looks like air flow path but is actually closed.  Ugly Predator mouths on the front and rear.  I scraped a hire Camry's front bumper on the lower left side because it is at least 150mm wider down there than it needs to be.  But having made that complaint, the rest of the car's design isn't vile.  The shapes involved in the bonnet, wheel openings, the style lines (such as they are) down the sides, are a whole lot less immature and stupid than most Korean an Euro-trash models at the moment.  And when I say "less immature and stupid" - that Camry actually looks good in all those areas.

  • Like 1
3 hours ago, GTSBoy said:

Toyota/Lexus design language has been getting progressively more stupid.  Same with Honda (Civic in particular).  Massive wafflebox black plastic that looks like air flow path but is actually closed.  Ugly Predator mouths on the front and rear.  I scraped a hire Camry's front bumper on the lower left side because it is at least 150mm wider down there than it needs to be.  But having made that complaint, the rest of the car's design isn't vile.  The shapes involved in the bonnet, wheel openings, the style lines (such as they are) down the sides, are a whole lot less immature and stupid than most Korean an Euro-trash models at the moment.  And when I say "less immature and stupid" - that Camry actually looks good in all those areas.

We agree for once but I support your view.

Styling in the Hondas, Toyotas and KIAs have in recent times become too "space-shippy" and round for my taste. Like the most recent Honda Civic Type-R, like what the fark? At least this Camry "looks OK" and hasn't gone off the rails too much. Performance wise, as the guys from TRD said themselves in the video - "it's really racey" without mentioning the specs. Fark, my Kluger is "racey" too my wife picking up the kids from school too...

3 hours ago, niZmO_Man said:

That front bumper, so rubbish. Who signed it off? Looks worse than Mirai.

It's not pretty true, but there's much worst out there. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...