Jump to content
SAU Community

Recommended Posts

Hey everyone I am having trouble trying to find rear brake rotors for my R34 GT non turbo, everywhere I have called and looked list the turbo brake rotors (297mm diameter) but the ones on my car are 265mm. I understand that the GT-V model came out with the turbo brakes and I’m guessing that’s why they list the NA’s with a 297mm rear rotor.

if anyone has an idea as to where I can get a pair or even some part numbers it would be much appreciated thanks.  

 

Link to comment
https://www.sau.com.au/forums/topic/475509-r34-na-265mm-rear-brake-rotors/
Share on other sites

Hey mate,

A while ago I was searching for rear rotors on my 25GT and I contacted RDA, I got an email back telling me they used to produce these rotors as RDA7690 but no longer do it anymore and they gave me the part numbers for some protex rotors "DR12834" and from my own research these are the only blokes that make them,

They're pretty pricey for some little 265 rotors at around $300+? from memory

Hope this helps

  • Thanks 1

Thank you for your suggestions I did give DBA and RDA a call and they didn’t have the particula rotor I was looking for. Upon some further research I found a brand called Dixcel which after a quick phone call they did have the rotors I was looking for.

 http://www.dixcelaustralia.com.au/

Here are the part numbers and specs for the front and rear rotors on a R34 GT (non GT-V)

Front rotor #3212011

Outer Diameter: 280 mm, Thickness: 26 mm, Height: 49.2 mm, Centre Bore: 68 mm, Holes: 5, PCD: 114.3

Rear rotor #3252018

Outer Diameter: 266 mm, Thickness: 16 mm, Height: 64 mm, Centre Bore: 68 mm, Holes: 5, PCD: 114.3

Hope this helps a few people that have had trouble finding them. 

 

  • Thanks 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...