Jump to content
SAU Community

Recommended Posts

57 minutes ago, Joshnew6 said:

I was told that I should gap them down from 0.8 to 1.1m 

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7900921
Share on other sites

This topic will probably help you Josh,

As stated above if smaller gapped plugs don't work you'll need to upgrade your coilpacks, the three options what come to mind are Splitfires (around $500), yellow jackets ($300), or yaris coil pack mod ($150ish)

 

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7900955
Share on other sites

  • 1 year later...

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7943185
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
On 3/18/2019 at 7:14 PM, GTSBoy said:

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945212
Share on other sites

48 minutes ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945216
Share on other sites

1 hour ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

 

32 minutes ago, Ben C34 said:

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Note word with emphasis. It's a really weak if. The real recommendation is to improve the coils. Gapping down plugs is a bandaid. Bandaids should not be used where proper fixes exist.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945218
Share on other sites

On 16/11/2020 at 6:36 PM, Joshnew6 said:

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

 

This really doesn't make much sense, unless your copper plugs were old and fouled and the problem was fixed with new plugs. Iridiums dont give you a better spark than coppers, they are just supposed to last longer. But on a modified high performance engine you dont tend to get that longevity out of them and need to replace them more often anyway. The price difference between coppers and iridiums is why most people on here will be running coppers. 

 

But yeh, I agree with GTSBoy here, gapping plugs is SO 2010. Nowadays R35 and Audi R8 conversion kits are a dime a dozen, I'm amazed 'Splitfire' and 'feeler gauges' are still words that people know.

Link to comment
https://www.sau.com.au/forums/topic/476363-r34-problems/#findComment-7945220
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...