Jump to content
SAU Community

Recommended Posts

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
Guys,

Is there a problem with oil getting into the AFM?

I have been told that it will ruin the AFM after prolonged use.

Is this true?

Yes after prolonged use it will go into the AFM but nothing a little contact cleaner and a steady hand can't fix. Dont want to kill the post but i have done signifigane dyno testing with air box's and found that a partition box with the air still accessible from the top is better than a completley enclose pod. The new Apexi filter is a non oil based filter and uses surrounding air from all area's. The Unifilter are a great product and i have used one in the past and the kit price is very well priced. But can i ask one question, why dont all you people who want a box make you own? It takes about 30 mins and cost ya about $20 :(

yeah no doubt some people are cable of making their own shield, this is a great option for people who can't or don't have the time.

The other thing I should mention is that I have seen a lot of cars coming from jp with an old HKS pod or similar. Generally, they either filter really poorly or are well and truely ready for replacement. Support a locally made and engineered product instead ;)

yeah no doubt some people are cable of making their own shield, this is a great option for people who can't or don't have the time.

The other thing I should mention is that I have seen a lot of cars coming from jp with an old HKS pod or similar.  Generally, they either filter really poorly or are well and truely ready for replacement.  Support a locally made and engineered product instead :cheers:

Couldn't agree more with you there Duncan, the ram pod should be one of the first things that people replace on there car when they first import it. Clean the AFM completly and then maybe look into using a non oil based filter from there. The Uni filter products are great and the contrstuction is top notch, if your in the market for a new filter guys take advantage of this buy as its a good price and a good product :headspin:

  • 2 weeks later...

drinkan. can you help me out with a partition/box to suit my pod filter wearing 32GTR? do you still run the stock air box in your improved GTR? if not what are you using? :D

Yeah unfortunately we have to use the standard airbox for Combined Touring and Targa :P.

pm sent re details of the 32GTR kit, we can get hold of these as well

Hi Duncan, please send me a PM as well re details of the partition/box for a 32GTR. I have got the Apexi twin air pods setup.

thanks in advance

glenn

Just a quick note for those who already have a pod filter... I can get ABS blanks with a 90 deg bend in them... Got one for myself, because I have custom intercooler plumbing. I just need to shape it myself. If there is intrest, PM me. They are about $30 plus P & H. Probably less for group buyy.

Pics attached.

Chris

  • 2 weeks later...

A free bump for the Unifilter Rampod induction kits.

I'm importing these into the UK from the good folk in Hornsby. Feedback has been excellent. I'm running one on my own GTSt, and also replacement Unifilter panel filters in my Delica, and Unifilter in my KTM bike.

The oil from these will NOT contaminate the AFM. Unlike some light oils that other filter manufacturers use, the Unifilters are oiled with a tackified foam filter oil. When you re-oil the foam, you squeeze out as much oil as humanly possible leaving only a sticky surface on the foam. Mine has been on my GTSt for ages now and there is absolutely no sign of AFM contamination.

I have found absolutely no noticeable diference in performance between runs with an Apexi dual funnel intake, a Unifilter Rampod induction kit and running with no filter at all (just the Rampod with the foam removed). Throttle response with the Unifilter Rampod and heatshield is noticeably better than when running the standard airbox. I am running 0.95 bar of boost and I suspect that the standard airbox MAY have been a little restrictive as this is well over the standard boost.

The Unifilters will also filter out far more crap than any dry foam filter, metal gauze filter or paper element filter is able to. A dry foam filter will only filter out particles that are larger than the spaces through which air flows in the foam. Metal gauze filter will only filter out particles larger than the holes in the gauze, and the same goes for paper element filter.

By the very nature of foam filters that are oiled with tackified oil, particles down to just a few microns across are filtered out as they cling to the sticky surface of the foam, rather than being drawn through. The majority of aftermarket filters will only filter down to 45 microns. Engine wear is caused by particle sizes as small as 17 microns, and something like a Unifilter will filter down to just a few microns.

Re the heatshield - it's not an enclosed box, but rather a partition that diverts the heat away from the intake, and is open towards the rear of the passenger side headlamp. It will not therefore restrict the intake of air into the pod as the pod remains open to air in all directions - so no worries there.

Final point - I've got to say that the metal construction of the Rampod intake tube is far better than the moulded plastic Jap Crap that nearly everyone for some reason is totally fixated on. It's about time people started to reliase that better stuff can be had from elsewhere other than Japan, and are far more sensible prices. Over here in the UK, the HKS and Blitz stuff is costing in the region of £200 just for the intake. The Unifilter kits, coming halfway around the world, are costing not much more than half of that including the heatshield and all taxes and freight.

Sorry for rambling..........just think you al should think about stuff other than what modified cars have on them when they leave Japan.

  • 4 months later...
  • 2 weeks later...
Hi Duncan, please send me a PM as well re details of the partition/box for a 32GTR.  I have got the Apexi twin air pods setup.

thanks in advance

glenn

can I have a pm too?

Hi Yogi, Unifilter only sell them as full kits, but thats good news since it gives you the chance to change your dirty, poorly filtering jp filter for a quality australian product :O

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...