Jump to content
SAU Community

Recommended Posts

I've heard a rubbing when I steer sometimes - It was not until I was under the car this weekend that I figured out what the issue is .. My LHS front wheel is rubbing up against the stabilizer front bar, not hard on it but enough to rub against it.  Whereas my RHS does not rub against anything.  Any idea what may be causing this is there something to adjust?   The tyres are brand new 225/50R16. See the photos for a clearer explanation. You can see how close the tire is and the rubbing mark.

20191116_125156.jpg

20191116_125229.jpg

Link to comment
https://www.sau.com.au/forums/topic/479194-tyre-rubbing-r32-gts-t/
Share on other sites

That's your caster rod/ radius rod.

Basically, the tyre is to wide for the offset of your wheels.  You may have previously had tyres the "same" size but in practice different tyre manufacturers have different actual tyre sizes for a nominated size like 225/50r16

Easiest solution, assuming you have plenty of thread on your wheel nuts, is to add a 5mm alloy spacer, which will push the wheel out 5mm, assuming they are legal where you are.

Spacers are not legal in Oz.

Wheels that fit correctly are the best solution - assuming that the wheels that you have are the wrong offset.

If the wheels are fine, you may find that you have something bent in the front end.

No, we cannot diagnose that sort of thing from photos.

What wheels are on the car. Width and offset.

 

5 hours ago, Strexx said:

Thanks guys but the new tyres are exactly the same size as the old tyres I just replaced - Is the 5mm space legal in NSW?  If I do not use the space or if I do for that matter will this impede my Blue Slip?

Are spacers the only fix?

Did you read Duncan's answer regarding differences in actual size versus nominal size among manufacturers? Are your new tyres the same brand and type (and sourced from the same factory/country) as your previous tyres? Do you have stock wheels and if not what is the width and offset of your current wheels? Another possibility is that you have whacked a kerb with that wheel and damaged the suspension.

Spacers are not the only fix. Other solutions are different wheels, tyres, or lock stops.

So being new to this scene - I have no idea what offsets are. I can tell you that the last set of tyres I had on the car were all of a different brand! Yes all my new tyres are same brand, same size, same batch, RS4'sall bought at the same time. The wheel sizing is 16 x 6 1/2 JJ 40 - It's my understanding these are genuine - are they? (See photo with old tyres) In hindsight when the tyres were fitted the wheels were balanced and one wheel was slightly buckled. (On their advice it's on on the rear).  So if it has had a hit - How can I identify what is outta whack and what needs to be replaced?20191102_085640.thumb.jpg.935b55e8c04ca57e5f9c773d4820b233.jpg

Those are standard wheels and you should not have rubbing problems with those tyres on that wheel.

Control arm bushes could be stuffed, upper arm bushes are probably completely rooted. Both of these could cause the upright to lean the wrong way. it could have taken a hit into a kerb and moved the subframe under the chassis rails. You'd be best off taking it to a (good) wheel aligner to see if they can work it out.

225/50 too fat for 6.5 (it's for standard GT-R 16x8 wheels IIRC), should be 205/55. But shouldn't have rubbing issues.

Standard R32 GTS-t wheels are +40, perhaps tyres are deflecting too much? Looks like your car is lowered so geometry would be off.

Most likely something is bent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...