Jump to content
SAU Community

BK, about time for a build thread ? - 1995 R33 GTR V-spec twin turbo


BK
 Share

Recommended Posts

R33 accepted into Elite show hall for display before Motorkhana, which will be going for its 3rd win racing. Going to ditch the drags in this car. It does 11.5 at 120mph so I'm done with risking any further drag racing related stone chips, as ASID track is very gravelly. Top fuel cars are going to hate it.

20220901_110547.thumb.jpg.9afb508ba3cf2df43e909222b12c4fac.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Ok RCN 08 is done for 2022, so I'll debrief here. The R33 GTR above won top Japanese car for the event in the elite show n shine component. The car is immaculate inside and out really for a 27 year old car with a genuine 81500km, hence the retirement from ever returning to a drag strip.

The racing for the weekend didn't quite work out as planned. The two 32 both ended up having issues at the strip on Saturday. White 32 shit a CAS restricting timing to a max of 5 advance, so as you could imagine it knocked the shit out of producing any power. I checked this after it's first and only run after it clocked a laughable 105mph 😆

Cue the blue 32. After a previous shakedown of 139mph, I put it back on E85 and was reading consistently over 70% ethanol content, so I decided to send it. I re-enabled launch control at 6500rpm and full boost at 32 - 33psi. Launched of the line at a not so great but ok 60ft of 1.82 and proceeded to smash through the gears until I lost power at top of 3rd when changing into 4th. Sensing something was wrong I backed out of the run at about 3/4 track and coasted through at 11.51 at 128mph. On further inspection let's just say something stopped the blue 32 from continuing on that day, meaning an early retirement from the strip on Saturday so we could try and rectify the cars for the Motorkhana event on Sunday.

After "fixing" the blue 32, swapping the crank angle sensor out on the white 32 and picking up the 33 we headed out to the Motorkhana with all 3 cars ready to race. The Motorkhana event on Sunday was bloody awesome with all 3 GTRs performing flawlessly with no problems unlike at the drags. My impression from the Sunday event:

-White 32 handles awesome and has a heap of power. The 6466 1.00 a/r is not too big for the 2.6 and was definitely very very responsive and great on / off throttle response. Amazing what the correct and accurate timing did for the car.

-White 33 performed as expected - It grips, turns, stops and has a great balanced power delivery. Nothing new there.

-Blue 32 🥰 What can I say.... Only thing to say is HOLY F**KEN SHIT !!!!! This car initially scared that shit of me out there as the power was frigging insane ! This was the car I drove the most on the day as it was just so much fun - I've never driven a car with this much power in an environment like this 👍After getting used to the 600kw + with the imposing concrete and water wall barriers, the car was awesome in its handling, traction and mind numbing power delivery - very confidence inspiring 😃

So in a wrap, the fastest GTR out of the 3 at the event was.....

 

THE 33 WITH THE TWINS !

 

After winning the 2020 and 2021 event I couldn't make it 3 years in a row, by a tenth, securing 2nd place overall from just one try in the 33. The 32s with the single 6466 turbos were just too aggressive with too much power on this type of track, but were way more fun to drive ! TBH I think the blue 32 COULD be the fastest with more skill and practice behind the wheel, but really just showed that the 33 was just a much easier car to drive fast on the limit. Overall a pretty successful outing considering there were no major failures during the event. First time for everything eh ? 🤣

Until next time 👍

20220904_132436.thumb.jpg.1c1d65ce74440b94aabf0dc3fa71a41c.jpg

20220904_132448.thumb.jpg.4ce4e99da690d6b1f63a5c035412013e.jpg

20220904_132525.thumb.jpg.a1a40c3aeb061acc852574ffc4a7ee1a.jpg

20220904_132511.thumb.jpg.3098c39bcac32a3d8877dc4ca4d0e268.jpg

20220904_132547.thumb.jpg.20e1d15554787403d946778c077d7602.jpg

20220904_132611.thumb.jpg.703e5868e4a6d11bdb6bc0d9359c1b11.jpg

20220904_132653.thumb.jpg.67e8df58c2b136d4d3776edbe7ad3b4b.jpg

  • Like 4
Link to comment
Share on other sites

On 14/09/2022 at 5:58 AM, Duncan said:

Sounds like you had a hectic but fun weekend.

And....

Of course twins > singles

Defintely hectic, but heaps of fun  Regarding the twin vs single debate it was a good back to back to compare pro and cons of each.

The biggest issue with the singles is they have soooo much power, which upsets chassis balance in something like a Motorkhana with such tight conering. When the twins come on the power is delivered in a much more manageable way. In any other situation the singles are the far superior choice as the throttle response and spool up is great, matching or exceeding what the twins were capable of but with much more power being harder to control for mere mortals like myself.

In my opinion, only power levels of 350kw or lower should twins ever be considered as an option, as the singles from here on do everything better.

Link to comment
Share on other sites

On 14/9/2022 at 10:15 AM, BK said:

Defintely hectic, but heaps of fun  Regarding the twin vs single debate it was a good back to back to compare pro and cons of each.

The biggest issue with the singles is they have soooo much power, which upsets chassis balance in something like a Motorkhana with such tight conering. When the twins come on the power is delivered in a much more manageable way. In any other situation the singles are the far superior choice as the throttle response and spool up is great, matching or exceeding what the twins were capable of but with much more power being harder to control for mere mortals like myself.

In my opinion, only power levels of 350kw or lower should twins ever be considered as an option, as the singles from here on do everything better.

But you’re comparing a single that flows ~600 kw vs a 350 kw twin setup so of course the single is going to hit like a ton of a bricks, anything would.

Put a single on that flows 350 kw, the same as a set of -9’s and see what happens. 🤷‍♂️

  • Like 1
Link to comment
Share on other sites

On 14/09/2022 at 10:06 AM, Piggaz said:

But you’re comparing a single that flows ~600 kw vs a 350 kw twin setup so of course the single is going to hit like a ton of a bricks, anything would.

Put a single on that flows 350 kw, the same as a set of -9’s and see what happens. 🤷‍♂️

Absolutely mate I know that and totally agree. Who in their right mind would bother doing a single conversion to get max 350 kw on an RB26 ? That would be like a baby Precision 5558 or so and don't even know what that would be in EFR.

The point I was trying to make is you can pretty much have a single that roughly comes in the same time as small twins but a LOT harder, as well as being able to deliver double plus the power. The singles were in no way laggier, but delivered the power in a much more aggressive way on the road.

Cake and eat it too results I think when it comes to singles. The two white cars are both 2.6, running the same 20psi boost and spool from vac to boost was similar - but even on low boost with the 6466 the power delivery is much more savage compared to the twin hks gt-ss / -9's translating to a car that was much more of a handful.

Link to comment
Share on other sites

On 14/09/2022 at 12:57 PM, BK said:

Absolutely mate I totally agree, but who in their right mind would bother doing a single conversion to get max 350 kw on an RB26 ? That would be like a baby Precision 5558, don't even know what that would be in EFR.

I guess the point I was trying to make is you can pretty much have a single that roughly comes in the same time as small twins but harder, as well as being able to deliver double plus the power.

Cake and eat it too results I think when it comes to singles.

I love this discussion, brings out some interesting and valid points.  I've never argued hard against people chosing to stay twins at 350kw as really the single benefits aren't going head and shoulders away from twins YET.  I still prefer them, but the argument is less one sided.

Now in regards to the high power vs control thing, this is really what got my attention in this discussion - we at the best of times get hard ons for showing and bragging about epic power delivery but the reality is often what matters SO MUCH with racing is making the car driveable, and reliable.   A good number of the turbo race cars I've tuned we've done a lot of work in managing the torque to keep the cars predictable, and it can seem like you're just leaving stuff on the table for no use - but honestly its amazing the difference you can make giving what people may grumble and call a "peaky" power delivery.   No point making it hit like a train if you are going to be all over the show trying to keep the car on the road.

An option you have with the likes of your 6466 that you don't with the twins is you can more or less tune the 6466 to do stuff that makes the twins good, but you can't do the other way around.   As a hypothetical thing, if you look at the dyno plot for the twins - which you know you can control the car with nicely then identify the peak torque you make with them, then select a boost curve with the 6466 that never exceeds that torque.... but ramp the boost up to carry the torque to the far end of the dyno plot, instead of letting it plummet like the twins do then you potentially have some degree of having your cake and eating it too.     Well maybe a 6466 is a bit more snappy/laggy transient wise than the EFRs/G-series that I've played with but you'll get the gist of the what I'm saying?   

I've done this kind of thing with numerous FWD/RWD/even 4WD race cars when creeping up in power levels where the owners have decided to try the suggestion as an "in between" while working up with a bigger setup and then ended up finding that it actually at least in those cases made the car easier to drive faster and is generally less hard on the car on the driver and been relatively happy leaving it there.

It may seem counter intuitive when we work so hard on finding ways to improve torque, but really in a lot of cases the "how hard is it to get to the torque I'm looking for" is a lot more important than "how much torque can I make?" when you're trying to go fast.

 

 

Edited by Lithium
  • Like 1
Link to comment
Share on other sites

So, I totally didn't mean to start a serious discussion, but clearly at (relatively) low power levels, standard configuration twins are perfectly adequate for competitive use.

Depending on race category rules, response can be everything. The BSM national champs winning IPRA car ran smaller than stock twins due to the intake restrictor requirements, and N1s are perfectly adequate in production car racing too.

Even in a case where the rules don't limit power, it can absolutely be better to trade off 500rpm for 100kw or more at the top end, as BK just demonstrated in the motorkhana....500rpm can take forever sometimes....

  • Like 2
Link to comment
Share on other sites

On 14/09/2022 at 11:10 AM, Lithium said:

managing the torque to keep the cars predictable, and it can seem like you're just leaving stuff on the table for no use - but honestly its amazing the difference you can make giving what people may grumble and call a "peaky" power delivery.   No point making it hit like a train if you are going to be all over the show trying to keep the car on the road.

^Pretty much this mate, spot on. It wasn't that the 6466 cars were laggy at all, just they delivered actually way too much mid range torque to be usable compared to a much more predictable / not over the top power delivery.

  • Like 1
Link to comment
Share on other sites

On 14/09/2022 at 2:06 PM, BK said:

^Pretty much this mate, spot on. It wasn't that the 6466 cars were laggy at all, just they delivered actually way too much mid range torque to be usable compared to a much more predictable / not over the top power delivery.

Overall sounds like a lot of fun :D

Link to comment
Share on other sites

On 14/09/2022 at 1:30 PM, Lithium said:

Overall sounds like a lot of fun :D

Yeah it was great pushing the cars. I was really impressed with the Hankook RS4 on the 32s, as it was the first time I'd used them in competition. The 33 that day was on the Advan AD08R and might be a factor on it being quicker ?

Not sure really as both gave heaps of grip.

Link to comment
Share on other sites

  • 3 months later...

Car has done nothing since September, but I did get around to refixing the genuine front bonnet lip on properly with new mounting hardware. My under bonnet insulation pad is now annoying me and probably needs a replacement as heat is starting to affect it, but I think they are drug money price now so probably won't happen.

20221209_194323.thumb.jpg.1263cdbeabd0510546a04d0639c14b19.jpg

20221209_194355.thumb.jpg.3ce10df79be417ee4766442d02b30638.jpg

20221209_194341.thumb.jpg.ed69645e62f7dd56bbad21ad9dc218f6.jpg

20221209_194724.thumb.jpg.07cf1883603e95b16d302a8f48c7f53d.jpg

20221209_194335.thumb.jpg.4556458646125ac23657354af07758f6.jpg

 

Link to comment
Share on other sites

  • 1 month later...

I saw all 3 cars on my way to work! Only time of the year I actually like working 🤣 Was an awesome sight. Shame my R32 broke down a month before the event :( Always keeping my eye out for the skylines. Also saw a black 33 GTST on the back of a truck heading to Barrett Drive.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Does this count as a time trial as well? I got all gold in the master super licence (1 lap time trial) and received a McLaren MP4/4 for my trouble.  If anyone else has done this, did you ride the wall right around the first long right hander at Lake Louise snow track to get gold? I couldn't do it any other way... best I could do without riding the was was within 2 tenths of the gold time.
    • I definitely get the low power, sporty car to drive to smash gears but not be doing eleventy million miles an hour! It makes all the normal drives fun!   Rev match tune sounds like the funs! I didn't know the NC had a DBW throttle!   As for me, still have the Skyline, it still has the Barra in it. It's been pushed to the side of the workshop at the moment. Pretty much waiting on me finishing the wiring, and dropping new fuel lines in. Got myself an ACDC Tig end of last year so been teaching myself TIG welding to build a few things for the Skyline. The missus wrote off her GTB liberty at the end of last year, and got it back on salvage rights stupid cheap. It's also still registered, so will mean easier for me to take to the track already done most of the panel damage, just playing "clear the workshop" to make space to pull the motor and box out, fix some oil leaks, replace the clutch, and replace a few minor broken things.  Also got a Lathe at the start of the year, which is adding to the annoyance of no space, which is another reason I'm trying to build things to get more space, to get the Lathe back in a final home for it. It's a BIG lathe, can turn a 355mm diameter, and 1metre between centres... Got it at a steal! So between it and the TIG and old MIG welder, I'll be fabbing some fun little shit up But we've had a lot of shit stuff happening at home, so it's slow going getting things done. But one step at a time!
    • I love Catalunya.  Got a 1:54.632. The AMG is a hoot.
    • I hadn't got that far, my main worry was the connection to the actual calipers themselves. I'm just using new (ish) stock brake lines in the stock setup. I've just had a stud welded to the knuckle that is a little lower than the original stud (so my knuckles have two studs each side) to not have it be stretched so far in previous BBK setups, so the "block" (in the second picture) mounts a little lower for me and I hope I don't need to change anything. I may have even changed the connection to the calipers in the past and have since forgotten I did that. I may not have. Guess how I'm gonna find out. Source: hopium
    • It's more so I'm using the 1x piece line from HEL that goes from the body to the caliper. There's no middle block/mount like the HFM ones or the GKtech ones. There are certain angles/suspension compression where the line actually slightly contacts the ARB. Below of how mine sit (not my photo): How I want it:  
×
×
  • Create New...