Jump to content
SAU Community

R35 Looking to Buy questions


Adz2332
 Share

Recommended Posts

Hey all

Im in the market now for a R35 GTR

Ive been looking around at the ones in the 2009 era.

What conman things should i look out for?

What problems can i get checked?

I would most probably take it to my tuner to run his eye over to

Link to comment
Share on other sites

I think pre 2011 maybe 2010 had some sort of gearbox issue. If its an 09 or early 10 you'd want to know that has been rectified. I assume if you google about it, there should be lots of info as well as merica sue someone, class action, save the kids type posts.

If i was you id be stretching as far as i could to get the newest model with the lowest km as possible. A bloke i worked with had an 09 and its not a case of if but when the gearbox plays up. His went with under 20k km on the clock. He then bought a 12 and now has an 18, both had no issues.

  • Like 1
Link to comment
Share on other sites

On 2/4/2020 at 1:42 PM, admS15 said:

I think pre 2011 maybe 2010 had some sort of gearbox issue. If its an 09 or early 10 you'd want to know that has been rectified. I assume if you google about it, there should be lots of info as well as merica sue someone, class action, save the kids type posts.

If i was you id be stretching as far as i could to get the newest model with the lowest km as possible. A bloke i worked with had an 09 and its not a case of if but when the gearbox plays up. His went with under 20k km on the clock. He then bought a 12 and now has an 18, both had no issues.

I'd second this. My old man was looking at one years ago and I remember from my research that you'd at least want an MY10 or plus to avoid the early gearbox issue. If you can stretch the budget, try for as new as possible with best service history.

Link to comment
Share on other sites

The trans issue in the early ones was usually the material around the input bearing wasn't good so would usually put a new bell housing 

Will probably need brakes & wheels can crack

Edited by WMDC35
Link to comment
Share on other sites

i went through this same process just recently, unless you find one that's below $75k, i am not sure if it's actually cost effective. there was a decent 09 car that went in 2 days, had all the transmission fixes done, full bolts and tune which is about 650awhp, otherwise i am finding that the facelift model (MY11+) are about the same cost as getting an 09 with low KM but ends up same as an MY11 due to requiring all the fixes to be done.

 

I ended up getting an MY12.

 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...

Agree with phillay, if you can find an 09 with all the mods done for a good price, go for it . Otherwise 11 or later when Nissan did the inevitable upgrade. Not sure about the psychology of 35 owners/sellers. Have the pleasure/privilege of running a 32, 34, 35, twin turbo350 and a JDM S15, among others. Always under pressure due space, rego and insurance etc, but when it comes down to it, there is simply no better car to get behind the wheel of. Just a fricking awesome car to drive, and always brings a smile when I touch that start button and hear that rumble! It would be the last to go.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • curious to know what drivers you chose and the results? quik mafs, says two 6.5s should roughly equate somewhere between a single 8" or 10" driver. i agree that IB is definitely the way to go in most cars imo.
    • S13 and R32 rear suspension geometry is horrible once you lower it (which everyone does). The camber & toe out ramp is very aggressive, hence it's common for the S13 boys/girls to use a S14 or S15 subframe as the geometry is light years ahead. I'm sure the same can be done on R32s, but I don't know anyone that has done that.
    • Well, of course there's something wrong with the suspension. It was like that when it came out of the factory. Nissan wanted it to ride at least 50mm higher than most of us. They wanted it to be comfortable enough that the press and user reviews didn't complain about fillings being knocked out of teeth. The marketing people wanted to be able to talk about their fantastic new 4WS system (even if it was a pointless exercise, ha! pointless! Do you see what I did there? no? oh well. too bad). There weren't any semi-slicks or semi-semi-slicks or 18" wheels. Laser pointers didn't exist, so you couldn't easily build a bump steer gauge. There wasn't any better technology for suspension bushes than squishy shit in a condom. The list goes on.
    • I personally recommend not messing with factory suspension until you can clearly identify something wrong. For example I think the R33 might need some way to adjust front camber because I feathered the edges of the tires much more than the center of the tread doing some figure 8s and slalom.
    • Did some baking today, managed to fit it all in the oven. Turned out pretty good. Hopefully it holds up well to a bit of tool abuse.  Popped a few pieces on to see what the colours will look like. Pretty happy with how it came up.  Now to wait for the rest of the stuff to rock up
×
×
  • Create New...