Jump to content
SAU Community

Recommended Posts

Hi Guys,

Been trying to find some information after finding a car which I like for sale in Japan. I've been in talks with the dealer, who has sent me an inspection report which was really just the auction sheet - not as comprehensive as I'd like.

I want to have this car inspected by a company local to Japan so I can better understand its condition - something similar to an NRMA inspection in Sydney. It will be a private import and I will go through an import broker, however before I sign away circa 1,000AUD I want to make sure the car is the one I want. I have been looking into JEVIC, has anyone else been in a similar situation and can provide me with any insight/experience.

AIM: to have a comprehensive inspection report on mechanical and structural integrity of the vehicle located at a dealer in Japan.

Thanks in advance.

Jip

  • 1 month later...

correct, my car came from an import shop call B-pro in Vancouver.  The selller sources out the car and its history with an inspection report, and importing fees included in price. stay away from sketchy importing, if you don't know much about the car and a proper inspection report is not provided id think twice... unless your ok with gambling on roughly 30-40k! I wanted a compression test done on my car as well. once that was provided I send the money. car still had a pile of issues lol....however rust free, healthy drive train like I asked. 4wd/abs bulb were burnt out car was in 2wd when it arrived(needed g sensor and attessa control unit) and needed coolant system completely redone. I think its safe to say all these cars come over from japan needing some work.

Edited by MoMnDadGTR
  • Like 1

good call m8 way easier buying a car you can see, feel, hear, and really become one with her if its the car for you mate! hope it works out for you post it up if you end up buying one, cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...