Jump to content
SAU Community

Recommended Posts

Everything looks great to me and turbos are in great shape have been gone through by my mechanic. Everything matches completely to one of the n1 specs but the compressor housing looks different to me? I could be wrong just want to know what I’m installing before i install the rats nest back together. They just have to get me by until I get my single turbo setup done and ready. I’ll be running 1.4 bar on these twins for now if I get confirmation they are good units and ready to boost hard! If they are legit I think they are the smaller of the 2 exhaust housing from my measurements but it says 64 a/r on the exhaust housing. One confused Canadian here or just an over tired tree cutter that shouldn’t be putting my car back together right now ha. Anyways the help is always appreciated mates. 

3B920D28-6E73-4C09-B55B-6997B19CD713.jpeg

98449F41-C86B-41F1-8B98-D27F064C885A.jpeg

E3231021-60EF-444F-914B-1D44CB296258.jpeg

67B83683-47E6-4A19-BB1B-D6914BCCEFAD.jpeg

Link to comment
https://www.sau.com.au/forums/topic/480285-are-these-r32-n1-turbos/
Share on other sites

I just wanted to confirm if they are actual n1’s as the compressor is different then my last set but the tag is the same 14411-06u00. I’m always happy regardless of boost or setup. Just looking for info that’s what the sites for. Not looking for comments on what to do and what is “safe” I didn’t buy my gtr be safe I bought it to drive it hard and maintain it. So yeah any info on the turbos would be cool thanks mates. 

I understand what your saying it doesn’t matter. Not at all really. Just piece of mind knowing I don’t have a Frankenstein setup as the guy I bought them from said they 100 percent legit. I later found the turbos had 2 different actuators so I started asking questions in my head about them...

According to Hoyle...

  • Rank: RB25DE
  •  
  • Members
  •  0
  • 324 posts
  • Gender:Male
  • Location:Manila

Yes the different HP outputs quoted by different people is confusing, but not if you realise that N1 Turbos have different configuration from year to year and above all variations in boost, head work, cams, injectors, manifolds, EMS tune etc. All contribute to a different vehical response, driveablity and output.

BNR32 (NISMO)......Serial No. 14411-06U00 (F/M273 deg. plain thrust bearing centre)

T04B Compressor with a 0.42 A/R and 62T

T25 Turbine with a 0.64 A/R and CD79

BCNR33 (N1)......Serial No. 14411-24U10 (F/M360 deg. plain thrust bearing centre)

T3 Compressor with a 0.42 A/R and 55T

T25 Turbine with a 0.64 A/R and 62T

Included this for information...all R34 GTR's are Ball bearing turbo's...all previous models are only plain bearing.

BNR34 ......Serial No. 14411-AA300 (Ball bearing centre)

C100 Compressor with a 0.53 A/R and 50T

T25 Turbine with a 0.48 A/R and 62T

BNR34 (N1)......Serial No. 14411-AA401 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA402 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA403 (Ball bearing centre)

C106 Compressor with a 0.60 A/R and 55T

GT25 Turbine with a 0.64 A/R and 62T

regards Phillip

Like
6 hours ago, KiwiRS4T said:

According to Hoyle...

  • Rank: RB25DE
  •  
  •  
  • Members
  •  0
  • 324 posts
  • Gender:Male
  • Location:Manila

Yes the different HP outputs quoted by different people is confusing, but not if you realise that N1 Turbos have different configuration from year to year and above all variations in boost, head work, cams, injectors, manifolds, EMS tune etc. All contribute to a different vehical response, driveablity and output.

BNR32 (NISMO)......Serial No. 14411-06U00 (F/M273 deg. plain thrust bearing centre)

T04B Compressor with a 0.42 A/R and 62T

T25 Turbine with a 0.64 A/R and CD79

BCNR33 (N1)......Serial No. 14411-24U10 (F/M360 deg. plain thrust bearing centre)

T3 Compressor with a 0.42 A/R and 55T

T25 Turbine with a 0.64 A/R and 62T

Included this for information...all R34 GTR's are Ball bearing turbo's...all previous models are only plain bearing.

BNR34 ......Serial No. 14411-AA300 (Ball bearing centre)

C100 Compressor with a 0.53 A/R and 50T

T25 Turbine with a 0.48 A/R and 62T

BNR34 (N1)......Serial No. 14411-AA401 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA402 (Ball bearing centre)

BNR34 (N1)......Serial No. 14411-AA403 (Ball bearing centre)

C106 Compressor with a 0.60 A/R and 55T

GT25 Turbine with a 0.64 A/R and 62T

regards Phillip

Like

my man thanks for the chart. theres r32 N1 with 270 thrust bearing. thanks for help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...