Jump to content
SAU Community

Recommended Posts

Do the bottom port test again off car to confirm it definitely passes to the top port, therefore being faulty. If it's got a split diaphragm it'll be obvious when disassembled with a tear in it - It's about the only thing that really fails on them.

👍

Just be careful when you pull the gate apart - remember big spring in there that can send the cover into your face if it flies apart without keeping it compressed on disassembly.

On 16/02/2022 at 4:02 PM, Chereboy said:

Think I might have found the issue20220216_173132.jpg

Good work, you owe me a carton 😄

That gate diaphragm is exactly the one I linked you to from RHDjapan, so around $150.

HKS part 1499-RA057

  • Like 1
On 16/02/2022 at 5:41 PM, BK said:

Good work, you owe me a carton 😄

That gate diaphragm is exactly the one I linked you to from RHDjapan, so around $150.

HKS part 1499-RA057

Thanks soo much man, I honestly appreciate it soo damn much. You've been a huge help.

On 16/02/2022 at 5:41 PM, BK said:

Good work, you owe me a carton 😄

That gate diaphragm is exactly the one I linked you to from RHDjapan, so around $150.

HKS part 1499-RA057

Also just curious on how I would fit it on as the one on my wastegate is round but the online one is squared off, do I just run a knife around the outside of the wastegate after clamping it shut? Thanks again

Nah the rhd one is round - have a good look at all the pictures again - it is curved and just a bit wrinkled up. It'll take shape when installing.

On 18/02/2022 at 8:46 PM, tridentt150v said:

On another tack...10psi sounds a bit low.  You would need to test, but a 14psi would probably suit that turbo and setup a bit better.

Hey mate, so your saying it would be worth my while to have a 14pound spring in there instead of the 7pound one? I'm also going to be tuning the car soon after the diaphragm arrives and I'll probably be pushing close of not a little more than 20psi. I'm also probably just going to have the ECU control the boost so I'll just delete the Blitz one

On 2/20/2022 at 1:16 PM, Chereboy said:

close of not a little more than 20psi.

The general rule is that you do not want to use a spring that is less than half the boost you want to bleed up to, and more spring is generally better than less. So for 20+ psi, you definitely want to be in the 14 psi spring range, rather than 10, and you definitely don't want to be using a 7.

On 20/02/2022 at 4:27 PM, GTSBoy said:

The general rule is that you do not want to use a spring that is less than half the boost you want to bleed up to, and more spring is generally better than less. So for 20+ psi, you definitely want to be in the 14 psi spring range, rather than 10, and you definitely don't want to be using a 7.

Alright mad, too easy, I'll definitely be sourcing out at least a 14 psi spring setup. Thanks mate

Edited by Chereboy
On 20/02/2022 at 3:26 PM, Chereboy said:

Alright mad, too easy, I'll definitely be sourcing out at least a 14 psi spring setup. Thanks mate

As your HKS standard gate has no spring preload adjustment on it, I'd say you want the purple spring as it should be about 1.1 bar fitted being that's minimum on the adjustable version  Available springs from RHDjapan attached, although HKS themselves say only the yellow and purple springs are available now and that the original standard gate spring selection is discontinued.

https://www.rhdjapan.com/search/brands/hks/category/turbo-and-na-systems/?q=Spring

Alright, I'm gonna order the purple one tomorrow, I'll see if they can add it to my pending order for the diaphragm as it's apparently going to be sent out on the 21st.

Anyone know how long I'm looking at it taking to reach Sydney NSW? I paid for the DHL shipping and wasn't really sure what it meant by 1-5 days as I'm sure it will take much longer than that to arrive and 5 days will be the 21st when I think they are saying it will be sent out. Thanks guys, don't really understand their shipping system

Screenshot_20220220-201933_Chrome.thumb.jpg.cb4ff0e834a1f1d482a3335fe7b3469e.jpg.

Edited by Chereboy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...