Jump to content
SAU Community

Recommended Posts

Has anyone ever had problems with the Walbro 255lph fuel pump. I have a pretty stock R32 GTR and was running fine and pulled well through boost with low knock. I decided to put a Walbro GSS342 255lph on cause my stock pump seemed to be given up from setting around. With the Walbro my knock goes through the roof if I try to make a pull. I ran a 12v to the back on a relay cause I thought it might not be getting enough juice. The car ran great last I drove it about 6 months ago. I have had the car in a storage container waiting on a new radiator. The pump was bought from amazon so was thinking I might have got a knock off.  Do fuel pressure regulators go bad? Should I just buy a Tomei pump or look for other issues.

Link to comment
https://www.sau.com.au/forums/topic/483466-bad-walbro-255-or-something-else/
Share on other sites

That is what happened to my stock pump. The walbro was new and not used, but I have had it about a year waiting til my stock one kicked the bucket. Surely it would not go bad from not being used if it had never been used. 

On 19/03/2022 at 11:34 AM, Dustin Frazee said:

That is what happened to my stock pump. The walbro was new and not used, but I have had it about a year waiting til my stock one kicked the bucket. Surely it would not go bad from not being used if it had never been used. 

Definitely unlikely for an unused fuel pump to be bad, but anything is possible. Go change your fuel filter first.

I had some weird hesitation issues after installing my Walbro 255, I have been meaning to try it with a 12v supply but just haven't gotten around to it. I've since returned it to the stock pump as the pump wasn't the cause of my issues in the first place anyway. 

I'm interested to know how your situation goes.

On 19/03/2022 at 1:59 PM, Dustin Frazee said:

Yeah I put some new fuel in and still the same. Should I be running the little regulator thing with the new pump? I am not sure if it is a check valve or what.

Screenshot_20220318-232655_Google.jpg

Fuel pressure relief valve, get rid of it as it can cause more dramas than retaining it, as the opening pressure is fairly low from memory. If it fails or activates, it just pumps the fuel out into the tank and you get no fuel to your engine.

This may be your problem if it has stuck open or partially open.

So if your car is actually running, what is your actual fuel pressure at idle and on load ? Really gotta go back to basics here and make sure you have an unblocked fuel filter then confirm your actual fuel pressures before guessing about anything.

On 19/03/2022 at 3:29 PM, Dustin Frazee said:

Yeah I put some new fuel in and still the same. Should I be running the little regulator thing with the new pump? I am not sure if it is a check valve or what.

Screenshot_20220318-232655_Google.jpg

Remove it asap!

Every S15 I tuned with lean out issues turned out to be running the OEM pressure relief valve in the tank, as soon as you hit about 1 bar or so of boost you see AFRs lean to the moon.

Deleted it and had to redo the entire fuel map.

On 23/03/2022 at 10:24 AM, joshuaho96 said:

Don't fuel pumps already have pressure relief valves?

External pumps no. Intank pumps like the Walbro or AEM pumps yes, but generally the ones that are internal to the pump on these are usually rated to something around 120psi. This is definitely an area that is compromised on knock off pumps too.

That Nissan heap of shit is something as low as 75psi. Now imagine 40+psi base pressure, 15psi boost plus fuel line losses of 15psi upwards with shitty 5/16" lines and you are already getting scary close to it opening - IF it is working correctly.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...