Jump to content
SAU Community

Recommended Posts

If you do this....

2 hours ago, nitznair said:

Better to get an engineer on board from the get go.

...then you don't have to worry so much about this....

3 hours ago, nitznair said:

if there are any issues arising from the conversion, that are picked during the certification process, the conversion shop can rectify them there and then

Besides, if it were me, I'd be wanting to know I had a shop close to home that is useful for such things anyway.

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 minutes ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damn man! Stock cats should pass emissions aye? Do you know of any other "trusted" engineers mate? 

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 minutes ago, MrRx7s3 said:

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

9 hours ago, nitznair said:

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

No it doesn't. It has to meet the standards that was in place at the time the vehicle was constructed. 

If your car was, I think, older then 1985, then you don't need an emissions test as there were no emissions standards/requirements at that time. 

If you are having trouble passing emissions, have a chat with a good tuner. It's not 'hard' to pass emissions, the car just has to be setup to pass emissions....  again this just adds to the overall cost involved in getting your certification. 

I am 100% confident that I could tune/setup a skyline to pass emissions and I'm not a professional tuner by trade.

21 hours ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

I once hinted that a supercharged engine would probably fail (because of emissions) and man did i get burnt by an angry member.

PS: you may wish to edit your post and remove all the carriage returns. I had to take it out of the above quote.

Edited by Vee37
4 minutes ago, nitznair said:

Would putting on a bunch of catalytic converters lower emissions? 

Say for example you have 4 cats on your exhaust, instead of the usual 2

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

17 minutes ago, Murray_Calavera said:

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

And then once you pass emissions, get a custom straight pipe done aye? 🤣

Once you get the engineers, its just doing pink slips yearly and rego? No more dramas yeah? 

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

2 minutes ago, Duncan said:

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

Ahhh gotcha. Yep no silly things like dark tints, slammed to the ground, overly loud exhaust, driving like a dumb flamin mongrel etc aye 🤣🤣. Just try to look and drive as "stock" as possible 😉🤣🤣

2 hours ago, nitznair said:

Yep no silly things like

2 hours ago, nitznair said:

a custom straight pipe

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

  • Like 1
3 minutes ago, GTSBoy said:

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

Ohh that's good advice man. Like a 100 cell or something aye? 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...