Jump to content
SAU Community

Recommended Posts

If you do this....

2 hours ago, nitznair said:

Better to get an engineer on board from the get go.

...then you don't have to worry so much about this....

3 hours ago, nitznair said:

if there are any issues arising from the conversion, that are picked during the certification process, the conversion shop can rectify them there and then

Besides, if it were me, I'd be wanting to know I had a shop close to home that is useful for such things anyway.

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 minutes ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damn man! Stock cats should pass emissions aye? Do you know of any other "trusted" engineers mate? 

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 minutes ago, MrRx7s3 said:

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

9 hours ago, nitznair said:

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

No it doesn't. It has to meet the standards that was in place at the time the vehicle was constructed. 

If your car was, I think, older then 1985, then you don't need an emissions test as there were no emissions standards/requirements at that time. 

If you are having trouble passing emissions, have a chat with a good tuner. It's not 'hard' to pass emissions, the car just has to be setup to pass emissions....  again this just adds to the overall cost involved in getting your certification. 

I am 100% confident that I could tune/setup a skyline to pass emissions and I'm not a professional tuner by trade.

21 hours ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

I once hinted that a supercharged engine would probably fail (because of emissions) and man did i get burnt by an angry member.

PS: you may wish to edit your post and remove all the carriage returns. I had to take it out of the above quote.

Edited by Vee37
4 minutes ago, nitznair said:

Would putting on a bunch of catalytic converters lower emissions? 

Say for example you have 4 cats on your exhaust, instead of the usual 2

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

17 minutes ago, Murray_Calavera said:

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

And then once you pass emissions, get a custom straight pipe done aye? 🤣

Once you get the engineers, its just doing pink slips yearly and rego? No more dramas yeah? 

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

2 minutes ago, Duncan said:

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

Ahhh gotcha. Yep no silly things like dark tints, slammed to the ground, overly loud exhaust, driving like a dumb flamin mongrel etc aye 🤣🤣. Just try to look and drive as "stock" as possible 😉🤣🤣

2 hours ago, nitznair said:

Yep no silly things like

2 hours ago, nitznair said:

a custom straight pipe

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

  • Like 1
3 minutes ago, GTSBoy said:

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

Ohh that's good advice man. Like a 100 cell or something aye? 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ahh...should have been clearer ~ there's 2 ... SMJ = super multi junction (connector)...   ...this is connector 6 & 25 in above image -- body harness to engine loom (6) & body harness to main loom (25) Headlights go to front via connector 6 ; fuel gauge goes to tank sender via connector 25  ...like I say this is R33 diagrams, but at a pinch R34 won't be too far different. *IF* the two ground faults are related, this can be the only place where both wires converge (as one runs to the back, the other to the front)... ....thing is, you probably need to establish if the faults are related (unless you examine that area and find obvious chaffing on the looms there to body ground)....*IF* the fuel gauge is still broken (full needle deflection), I'd be headed for the boot, remove fuel sender wire, key on and measure the voltage there ~ it should be roughly 10volts. If that's ok, check sender to ground resistance...if this is a dead short to ground (and there's fuel in it), then sender has failed or something funky has happened to wiring in the tank. edit: ahh...rereading the thread, this is R32....above fuel sender test still valid tho'
    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
×
×
  • Create New...