Jump to content
SAU Community

Recommended Posts

Hi all,

I hope this isn't frowned upon, but I am looking at upgrading brakes on my S15 mainly for the looks. I will obviously take whatever performance gains come with the upgrade as a bonus.

What I think looks good is large diameter rotors (around 350mm front and at least 330mm rear) and large calipers.

What do people think are the best option out there value for money wise?

Options I'm currently considering:

  • Attkd from Just Jap - Will cost about $5700 for everything
  • Evo Brembo's - Will cost maybe around $4500 depending on the caliper cost and condition

Others options are Akebono's with the kit from Concept Z Performance in the USA or CTS-V calipers (don't know much about this option and not sure if there is a kit for the rears).

Link to comment
https://www.sau.com.au/forums/topic/484717-best-brake-upgrade-for-looks/
Share on other sites

14 minutes ago, GTSBoy said:

Full brake delete. You'll get many more admiring looks from doing that than any other upgrade.

Hi. Thanks for the helpful comment! Not sure if I should bother...... but:

  1. I'm doing it because I like the look, not to impress anyone else.
  2. Wouldn't a brake delete be the opposite of what I'm after? Maybe try harder?
23 minutes ago, waggat said:

Hi all,

I hope this isn't frowned upon, but I am looking at upgrading brakes on my S15 mainly for the looks. I will obviously take whatever performance gains come with the upgrade as a bonus.

What I think looks good is large diameter rotors (around 350mm front and at least 330mm rear) and large calipers.

What do people think are the best option out there value for money wise?

Options I'm currently considering:

  • Attkd from Just Jap - Will cost about $5700 for everything
  • Evo Brembo's - Will cost maybe around $4500 depending on the caliper cost and condition

Others options are Akebono's with the kit from Concept Z Performance in the USA or CTS-V calipers (don't know much about this option and not sure if there is a kit for the rears).

Yeah I don't recommend doing this unless you need more thermal capacity. If your heart is set on doing this anyways I don't recommend random unknown brands for this stuff. Akebono or Brembo is fine though. Alpha Omega racing seems to like the Falcon FPV Brembos or Evo Brembos as you already mentioned. The fact that they're thinking about issues like pad knockback, suspension knuckle rigidity, brake bias, dust shield/piston dust boot retention, etc... is a good sign IMO.

I understand that by looks you just mean larger and new looking, so just grab whatever you can find cheapest in 350mm, any half credible brand will be adequate stopping wise. If you go the evo brembos you probably have to consider the cost of having them stripped, powder coated, rebuilt, re-stickered.

Personally I'd stay away from any home made kits as you won't know the quality of the caliper adapters which could be dangerous

  • Thanks 1

R35 GTR brakes with carbon ceramic rotors look the best for sure. 

https://www.alphaomegaracing.com/product/r35-gt-r-brembo-adapters/

https://www.amsperformance.com/product/alpha-performance-r35-gt-r-carbon-ceramic-brake-package/

Some say you can't put a price on looks. Others say that you can and it's about $35,000. But think of the value because really, the looks are priceless. 

  • Like 2
4 minutes ago, Murray_Calavera said:

R35 GTR brakes with carbon ceramic rotors look the best for sure. 

https://www.alphaomegaracing.com/product/r35-gt-r-brembo-adapters/

https://www.amsperformance.com/product/alpha-performance-r35-gt-r-carbon-ceramic-brake-package/

Some say you can't put a price on looks. Others say that you can and it's about $35,000. But think of the value because really, the looks are priceless. 

Saw someone on FB Marketplace post full kits for ~10k. Not sure if I consider that the best value for money compared to the Attkd kits for $5700.

2 minutes ago, waggat said:

Saw someone on FB Marketplace post full kits for ~10k. Not sure if I consider that the best value for money compared to the Attkd kits for $5700.

Sounds like they were just selling their R35 brakes. The big bucks are in the carbon ceramic rotors, those are about $20,000.

When you're going for max looks, gotta have those carbon ceramic brakes. I don't see Attkd selling a carbon ceramic option, so do you really have any other choice then the R35 kit at this point?

1 minute ago, Murray_Calavera said:

Sounds like they were just selling their R35 brakes. The big bucks are in the carbon ceramic rotors, those are about $20,000.

When you're going for max looks, gotta have those carbon ceramic brakes. I don't see Attkd selling a carbon ceramic option, so do you really have any other choice then the R35 kit at this point?

Meh.... Another comedian!!

  • Like 2
2 minutes ago, robbo_rb180 said:

Best value...........

https://www.ebay.com.au/itm/165900019651?hash=item26a06967c3:g:6qEAAOSwSOdjqVhv&amdata=enc%3AAQAIAAAA8C%2BdCsusVox3XxUhK3ZiFvts0Iy55uejoqdGDtbN3KFBlyCJ0Iw4j7sYBjppoq5%2B75RTWHeDLJoGT76cJNyYGgmiwFrHXMJ4M%2Fn4vkA8VO90YnBfBql2IhQnc5wmbNXQrnwFpLm6FLuSsbFC6BnXaSa%2FwVbXEB8hmMs9jk52ycwVMNQ5L%2Fxlc1q0UhKZuAhTalsCpmXv9aCGYDc2UCgnZ8FalU9wP%2FC%2F5Ut4YNQGTxnxahXiQgDixf5U73w8pWGNLnx0t2UJWtrC%2BDJfR7KTivVsocucxrdOwioWSO%2FcHhtSDLqhm6eIPFLDF0Q5VcsccQ%3D%3D|tkp%3ABFBMvOePnY1i


I have a EVO brembo setup and its around $6k with quality rotors, pads and refurb. Will only fit behind certain 17s so recommend 18 inch wheel with big brake clearance faces.

Any brake setup will also require a BMC upgrade, possible new lines, may have ABS issues and a possible hand/park brake relocation.

Hey mate, thanks for the response. Yeah I'm aware of most of those potential issues.

Is there any downside to running bigger brakes when done right? Or is it that people cut corners when it's just for looks and it compromises on a major safety component?

Genuine question as I'm not sure where the hate comes from. Big brakes certainly look amazing.

1 minute ago, soviet_merlin said:

Big brakes certainly look amazing.

This is true. And then you've spent $3k or $5k or $10k or $35k (if you've done it the best way) and you have something that looks good but doesn't actually do anything useful.

I'd rather spend $10k on the suspension. Black arms of course, because I give no f**ks for the looks.

18 minutes ago, GTSBoy said:

This is true. And then you've spent $3k or $5k or $10k or $35k (if you've done it the best way) and you have something that looks good but doesn't actually do anything useful.

I'd rather spend $10k on the suspension. Black arms of course, because I give no f**ks for the looks.

I wonder what wheels you've got...... I assume steelies in your desired diameter, width and offset.... f**k looks hey!!!!

7 minutes ago, waggat said:

I wonder what wheels you've got...... I assume steelies in your desired diameter, width and offset.... f**k looks hey!!!!

No, of course not. Now you are really showing that you don't know what I'm on about. Steel wheels are heavier than the very light RPF1s that I have. Why do I have RPF1s? Because they are very light. Are they the best looking wheel? Hell no. Are they close to the optimum of light & affordable & not ugly. Yes. Yes they are.

Oh. And they are black.

Oh, and so are my calipers.

And the hats on the brakes.

Edited by GTSBoy
2 minutes ago, GTSBoy said:

No, of course not. Now you are really showing that you don't know what I'm on about. Steel wheels are heavier than the very light RPF1s that I have. Why do I have RPF1s? Because they are very light. Are they the best looking wheel? Hell no. Are they close to the optimum of light & affordable & not ugly. Yes. Yes they are.

Ok. So you have your preferences. Why the f**k come into my thread and try and downplay my preferences? Does it hurt your ego that I don't give a f**k about your little performance requirements????

  • Like 1
41 minutes ago, soviet_merlin said:

Is there any downside to running bigger brakes when done right? Or is it that people cut corners when it's just for looks and it compromises on a major safety component?

Genuine question as I'm not sure where the hate comes from. Big brakes certainly look amazing.

No difference in use with "street" pads (ie pads that work from cold). It can be a problem with things like rally use where you might start sub zero but do a 30 min stage flat out so you need to deal with a very wide range of brake temps.

Really the only issue with big brakes on the street is they are expensive to buy, might need larger wheels (also expensive) and discs and pads will be more expensive at replacement time too.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...