Jump to content
SAU Community

What Discontinued Trim Do You Want Back?

Junsei

By Junsei,
in Exterior & Interior Styling

 Share

Recommended Posts

Junsei Rookie

Junsei

Posted
Posted (edited)

Hey guys! 

We're Junsei Auto Parts from Sydney and we remake discontinued interior trim, 1:1 identical to OEM quality.

We've been bringing back discontinued interior trim for the R32 and JZA80 Supra. So far we've remade the R32 Stereo Fascia Surround and the Dash Defrosters, pics below 👇

We're here to ask what discontinued parts do you want back? Not limited to any Skyline! Drop your suggestions and we'll see what we can do! 

Check out our R32 parts here: https://www.junseiautoparts.com/collections/nissan-skyline-r32

FrontFascia-1.jpg?v=1695801053&width=990R32FrontDashVent_1of2.jpg?v=1691218334&width=990

Edited by Junsei
Junsei Rookie

Junsei

Posted
  • Author
Posted
8 hours ago, GTSBoy said:

At least the hinge, if not the whole lid, for the armrest. Not the normal low height, longer armrest that was standard. The taller, shorter length one with the cupholders under it that was an uncommon option.

Like this OEM option? We can do that, we could definitely do the whole lid, OEM leather and all. 
Nissan Skyline R32 OEM Optional Cup Holder BNR32 GTR NISMO JDM Interior - Picture 2 of 10


 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Yuh, I have that one and the hinge is broken and the vinyl on top is cracked from years of elbows. I have been meaning to put effort into doing a better job of repairing the hinge (already done once, years ago, didn't last) and retrimming the top. But new made replacements would be even better.

The hinges are very low science, basically just being folded plastic. Any effort spent working out what to do to fix it on this lid would probably (maybe only possibly, depends on whether there's any commonality) be applicable to the normal lid's hinge too.

  • Like 1
Junsei Rookie

Junsei

Posted
  • Author
Posted
8 hours ago, GTSBoy said:

Yuh, I have that one and the hinge is broken and the vinyl on top is cracked from years of elbows. I have been meaning to put effort into doing a better job of repairing the hinge (already done once, years ago, didn't last) and retrimming the top. But new made replacements would be even better.

The hinges are very low science, basically just being folded plastic. Any effort spent working out what to do to fix it on this lid would probably (maybe only possibly, depends on whether there's any commonality) be applicable to the normal lid's hinge too.

Would you prefer a complete arm rest lid unit or a cheaper DIY kit that includes vinyl and new hinge?

GTSBoy Grand Master

GTSBoy

Posted
Posted

For me, just a DIY kit to replace the hinge and vinyl/padding. The rest of mine is structurally sound.

Whether you would find enough takers (for even that much effort spent) to justify the work is a harder thing to estimate, as there are very few of these out in the wild.

If you were to make the whole thing, including the armrest for the top part and the cupholder that replaces the original armrest, you might be able to sell them to people who would like to upgrade. If there are enough of them, that is.

silviaz Experienced

silviaz

Posted
Posted
20 hours ago, Junsei said:

Hey guys! 

We're Junsei Auto Parts from Sydney and we remake discontinued interior trim, 1:1 identical to OEM quality.

We've been bringing back discontinued interior trim for the R32 and JZA80 Supra. So far we've remade the R32 Stereo Fascia Surround and the Dash Defrosters, pics below 👇

We're here to ask what discontinued parts do you want back? Not limited to any Skyline! Drop your suggestions and we'll see what we can do! 

Check out our R32 parts here: https://www.junseiautoparts.com/collections/nissan-skyline-r32

FrontFascia-1.jpg?v=1695801053&width=990R32FrontDashVent_1of2.jpg?v=1691218334&width=990

Nice work there, the fascia looks great! 

Junsei Rookie

Junsei

Posted
  • Author
Posted
On 2/6/2024 at 6:47 PM, GTSBoy said:

For me, just a DIY kit to replace the hinge and vinyl/padding. The rest of mine is structurally sound.

Whether you would find enough takers (for even that much effort spent) to justify the work is a harder thing to estimate, as there are very few of these out in the wild.

If you were to make the whole thing, including the armrest for the top part and the cupholder that replaces the original armrest, you might be able to sell them to people who would like to upgrade. If there are enough of them, that is.

Yeah that's a tricky thing to figure out. We'll do some polls to get some more info. Where should we post them?

  • 1 month later...
GTSBoy Grand Master

GTSBoy

Posted
Posted
38 minutes ago, joshuaho96 said:

It's worth it because you can flip it for 1400 USD on Americans that can't look up part numbers for some reason.

And they also confess that they just 3D printed them! Which makes me wonder if they will buckle in the heat worse than the originals did. Perhaps I need to hire a Chinese hacker to get the print files out of Nismo's server?

DaymoR32 Proficient

DaymoR32

Posted
Posted
15 minutes ago, GTSBoy said:

And they also confess that they just 3D printed them! Which makes me wonder if they will buckle in the heat worse than the originals did. Perhaps I need to hire a Chinese hacker to get the print files out of Nismo's server?

Not necessarily, completely depends on how its printed and what material they use. i cant see Nismo using a $200 FDM printer and PLA 

Junsei Rookie

Junsei

Posted
  • Author
Posted (edited)

The R32 defroster vents were definitely on our to-do list, but now that Nismo announced that they're remaking them we're not 100% sure if we should as well, they did however state that the vents will be 3D printed, which may be the reason as to why its a 3 piece design rather than the original 2 piece design.

That being said we were planning on remaking these using Injection moulding which is how the originals would've been manufactured, and they were definitely going to be priced lower than what Nismo is currently pricing their vents. As for the material we were looking at using AES plastic, which is like ABS plastic but has UV protection properties. 

As of right now we'll just have to wait and see whether the Nismo vents are up to standard or not and we'll go from there.

Edited by Junsei

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...