Jump to content
SAU Community

Recommended Posts

I put my Stagea 260RS on a dyno today (Results in the Stagea Forum). Not a bad result. It gives me a baseline. Getting some pulsing when it makes power. The guy running the dyno thinks it could be plugs, wastegates, or cats. Going to start with the easy one and change out the plugs.

Regardless, an interesting thing popped up on the two pulls. Speed topped out at 101 mph (163 kph). That seems low for the power it's producing. Is there a speed governor/limiter on this car? Did Nissan find some way to cap top speed on this car or engine?

-Kip

Edited by Kip
typo
Link to comment
https://www.sau.com.au/forums/topic/485328-rb26-speed-governor/
Share on other sites

1 hour ago, Kip said:

I put my Stagea 260RS on a dyno today (Results in the Stagea Forum). Not a bad result. It gives me a baseline. Getting some pulsing when it makes power. The guy running the dyno thinks it could be plugs, wastegates, or cats. Going to start with the easy one and change out the plugs.

Regardless, an interesting thing popped up on the two pulls. Speed topped out at 101 mph (163 kph). That seems low for the power it's producing. Is there a speed governor/limiter on this car? Did Nissan find some way to cap top speed on this car or engine?

-Kip

Are you sure it’s not slipping on the rollers? All Japanese market cars have a 180 kph limiter from the factory. 

The shop owner ran it, so I don't know what gear he ran it in. That said, I've used this shop before to test a modified 911 that was supposed to put out 475 hp at the crank. He was able to confirm that.

Interesting thought on wheel spin. Given the time of year, I ran the pulls with my winter tires on the car (stock size, Blizzaks). I asked before we started if that would be a problem and I was told it wouldn't. There was a high pitched squeal when the car was at full tilt. Maybe that's what I was hearing.

-Kip

1 hour ago, joshuaho96 said:

Are you sure it’s not slipping on the rollers? All Japanese market cars have a 180 kph limiter from the factory. 

180 kph limiter? Thanks. I didn't know that. 180kph would be about where it topped out (topped at 162 kph). How does one get around the limiter? Some sort of EFI or is there a mechanical solution?

-Kip

24 minutes ago, Kip said:

180kph would be about where it topped out (topped at 162 kph).

That's either a severe speed error in whatever was saying 162, or not the speed limiter causing it.

The ECU gets its speed signal from the speedo in the car. Unless someone has changed the ECU's speed limiter setting (downward, which is possible, but stupid and very unlikely) there is no way that there is going to be a ~18 km/h gap between what the speedo says and what the ECU thinks the speed is. Well, maybe there is one way. The speedo can get full of grease if the seal at the gearbox speed sender leaks and allows grease to flow up the cable drive. But....you almost certainly do not have a cable drive on a car of this vintage, so forget about that possibility.

The "fact" that it did the full pull up to ~160 was the reason Dose asked if it was done in 3rd gear. 4th gear will not run out of revs until much higher speed than that. The dyno run went to over 7500 rpm, which would be >180km/h in 4th.

I'll ping the shop. See if they recall. It was only a couple hours ago, so the odds should be pretty good. If not, they took video of the runs for their website (Stagea's are rare in the States). If it's not edited too much, maybe it will give some indication of the gear they used.

-Kip

Was the speed taken on the dyno or your cluster? As I also have to deal with seasonal tire changes, I'm presuming you have smaller winter tires like most? If so, it causes a difference between cluster and actual road speed.

Cluster was at 180kmh limit but you were reading 163kmh on the dyno. 

 

Edited by TurboTapin
23 hours ago, Kip said:

180 kph limiter? Thanks. I didn't know that. 180kph would be about where it topped out (topped at 162 kph). How does one get around the limiter? Some sort of EFI or is there a mechanical solution?

-Kip

If it is the ECU speed limiter you can chip the ECU to get rid of it. 

  • Like 1
6 hours ago, TurboTapin said:

Was the speed taken on the dyno or your cluster? As I also have to deal with seasonal tire changes, I'm presuming you have smaller winter tires like most? If so, it causes a difference between cluster and actual road speed.

Cluster was at 180kmh limit but you were reading 163kmh on the dyno. 

 

I'm quoting the speed from the dyno. It's what's printed on the readout.

My winter tires are 245/45r17. Stock size is 255/50r17. An online calculator tells me my tires are 5mm shorter than stock and requires 3 more revolutions per KM. I think your point is valid. The same calculator confirms that it introduces some error to the speedo. When my speedo reads 150kph, I'm actually doing 148.9kph. It doesn't make up the whole difference, but accounts for some of it.

Speedometers can be impacted by so many different tire variables: amount of wear, tire pressure, size, etc. On most every car/van/truck I've owned, I have found that speedos read 2-3 mph (4.4 - 6.6 kph) higher than actual speed. Now knowing that the speed limiter is reading off the cluster, I have no doubt the clusters inaccuracy comes into play here. To @GTSBoy's point, It doesn't account for all of the "missing" 18 kph.

2 hours ago, r32-25t said:

No you can’t, only on a 32 

aftermarket ecu is the solution 

There’s a bunch of Japanese ROM solutions around. It may be built into the MCU but the advantage of japan still living in the stone ages for this stuff is you absolutely can ask them to give you a ROM chip that is stock but with the limiter removed. 

5 minutes ago, GTSBoy said:

Really? I find that very hard to believe. That is a simply massive tyre in terms of both width and sidewall height for a stock Nissan. Typically on a 17, Nissan were using 235/45.

I must ask, are you sure?

Factory wheel is a 17x7J supposedly so 225/50R17 is probably the actual tire size.

4 hours ago, joshuaho96 said:

There’s a bunch of Japanese ROM solutions around. It may be built into the MCU but the advantage of japan still living in the stone ages for this stuff is you absolutely can ask them to give you a ROM chip that is stock but with the limiter removed. 

The rom chips can only be done on 32 ECUs not on 33 or later which includes stagea  

36 minutes ago, r32-25t said:

The rom chips can only be done on 32 ECUs not on 33 or later which includes stagea  

http://www.mines-wave.com/english/CATALOG/ECU/VX-ROM_NISSAN.htm#SKYLINE

Stagea 260RS says it can be done on a trade-in basis. I guess you're right in that there is no separate ROM chip and doing the rework will suck but sourcing the right Hitachi H8, programming the onboard flash storage, and soldering on a new one with the speed limit set to whatever you want it to be is entirely possible.

The only question in my mind is whether you can even still buy programmable H8s in the right formfactor/automotive grade/etc. A lot of the tuners in Japan absolutely still have all the hardware necessary to do the programming otherwise you wouldn't see companies like Nismo still hawking remapped stock ECUs with their engines. Techtom was the same thing. 

Only reason to bother with this is if you have no plans to change anything. Stock tune, stock car, etc. Otherwise I agree, skip all this nonsense and go straight to Elite 2500/G4X/KV8/etc. But from personal experience truly achieving 100% stock equivalency on a standalone ECU is very, very difficult and I don't think any tuner out there actually cares either.

16 hours ago, GTSBoy said:

Really? I find that very hard to believe. That is a simply massive tyre in terms of both width and sidewall height for a stock Nissan. Typically on a 17, Nissan were using 235/45.

I must ask, are you sure?

Sorry. Typo. It's a 225/50r17. @joshuaho96 called it right. My bad.

Edited by Kip
Additional content
11 hours ago, joshuaho96 said:

Only reason to bother with this is if you have no plans to change anything. Stock tune, stock car, etc. Otherwise I agree, skip all this nonsense and go straight to Elite 2500/G4X/KV8/etc. But from personal experience truly achieving 100% stock equivalency on a standalone ECU is very, very difficult and I don't think any tuner out there actually cares either.

Based on the dyno results, the car already has some modifications (~269 kw at the crank). I need to find out to what extent, but assume some sort of ECU adjustment has been made previously. I'll have to check that out too.

I will be changing out some of the exhaust (still running the cats, but blew out the fiberglass packing on the dyno), so I'm leaning towards a Haltech PnP approach. That's all dependent on what I find though.

On 09/03/2024 at 4:06 PM, r32-25t said:

not on 33 or later which includes stagea  

Can be done, @Toshi does them (no idea if he's still around).

He was flashing R33 RB25DET ECUs back in the day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...