Jump to content
SAU Community

Recommended Posts

Hi. In these days i finally get to the interior. Bought some new parts to change and now iam at the radio unit.
It is some old carrozzeria unit. 

Is there any unit to fit to the R34 which can show me some info about the car like oil/coolent temperature etc? I just want cuz of this. If it cant i try to find OEM cuz i dont even listen to music :-) 
 

Link to comment
https://www.sau.com.au/forums/topic/485720-1998-r34-head-unitinfotainment/
Share on other sites

There's the Apexi DIN3 meter however it's long been discontinued:

https://www.apexi.co.jp/products/discontinued-products/din3-meter/

This guy installed one in a R34 Skyline 1DIN pocket using brackets which could go in the space for the radio? I don't own an R34 so can't confirm.

https://minkara.carview.co.jp/userid/2839151/car/2447015/5771545/note.aspx

If you could find one for sale it might do the job?

 

Edited by Rezz

I want to say that Haltech can be used with ODBII tools nowadays. Kinda useful if you want your head unit to do other things as well, like maps, music, phone calls.. *and* digital gauges.

Stock ECU does not use ODBII. I don't think a R34 is going to have any head unit that reads OEM ECU's to display.... the things the gauges already display. (boost, battery voltage, oil temperature, oil pressure)

Also keep in mind that oil temp, oil pressure are not in the ECU unless you add them.

Either way you should be able to get RealDash running on any unrestricted android head unit, I used an ATOTO S8. Mine is connected to a Link but I assume Haltech is the same basic approach, you just need to add a CAN to USB converter for the head unit. 

More details of my setup in my stagea build thread (somewhere...) if that helps

The Apexi DIN 3 is just 3x gauges. You can achieve the same goal via a number of different approaches. You can buy 3x 52mm stepper motor gauges and their accompanying sensors and fit that up with a 3x gauge mount. I have EGT, Boost and Oil Temp in mine.

If I were starting from scratch these days, I would buy an LCD or OLED screen, driver board and Arduino or similar and build from scratch.

Ok thanks i try look into it.

And i dont wanna start a new thread so i ask here.

Can this steering wheel https://trust-kikaku.myshopify.com/products/875111001 fit on my car (R34 GT) It has OEM GT/T wheel (no auto - factory manual) Of course the center with the airbag would be from that stock wheel.

7 hours ago, Kapr said:

Apexi DIN3 would work with stock ECU/car?

Yes. It's not dependent on the ECU. It's connected to its own set of sensors and uses its own harnesses/sensor unit.

img_el_din3m_04.jpg

  • Thanks 1

The sensible solution is probably to follow everyone else's advice and get something that just reads from CAN and can show anything.

But, in similar style as Apexi there's also the Defi DIN gauge kit. They are still making them and releasing new colour schemes. Comes with its own sensors and runs independently from the ECU.

https://www.defi-shop.com/products/din/summary_din/
https://www.nengun.com/defi/din-gauge-rhd

I have those in my Stagea. Personally I like them because they are good quality clean looking analog gauges that look OEM at night. Reading coolant temp, oil temp + oil pressure. Shows at a glance whether the car is warm enough to boost it or getting too hot and need to let off a bit.

gauges_1.thumb.jpg.d172ae6d91e6cef17777daebfe903fd8.jpg  gauges_2.thumb.jpg.c0234a270287b8c73ccea2fd0b9bf4cf.jpg

Lessons learned with this:
- The pressure sensor output can also be split off to an aftermarket ECU. Mine goes to both the gauges and the Haltech
- Apparently can't do that for temperature sensors. From what I understand they use specific resistances for the signal and splitting off from it might mess with the readings.

  • Like 1

The thing about the above is that the R34 already has a triple gauge cluster for this. Though you could run 3 _more_ which is what I used to do back in the day. But you do start to run out of things to monitor.

Ultimately the stock ECU is kinda limited. You end up eventually replacing the stock ECU then start picking up gauges and displays that interface with the ECU you end up going with.

On 8/11/2024 at 8:48 AM, Duncan said:

Also keep in mind that oil temp, oil pressure are not in the ECU unless you add them.

Either way you should be able to get RealDash running on any unrestricted android head unit, I used an ATOTO S8. Mine is connected to a Link but I assume Haltech is the same basic approach, you just need to add a CAN to USB converter for the head unit. 

More details of my setup in my stagea build thread (somewhere...) if that helps

Haltech are releasing Haltech Connect.

Their Nexxus ECUs have WiFi, and the Headunit can connect over WiFi direct to the ECU.

Also allows full access to every parameter in the ECU, so you can tune from the Headunit. :P

15 hours ago, MBS206 said:

Haltech are releasing Haltech Connect.

Their Nexxus ECUs have WiFi, and the Headunit can connect over WiFi direct to the ECU.

Also allows full access to every parameter in the ECU, so you can tune from the Headunit. :P

Took those guys a very long time to catch up with PowerFC!

23 hours ago, Duncan said:

Took those guys a very long time to catch up with PowerFC!

No no, PowerFC comes with its own HeadUnit! Haltech you need to use someone else's Headunit! 

 

Plus, the PowerFC hand controller, you can play Tetris on it too!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...