Jump to content
SAU Community

Help removing R34 GTT coilpack cover

DraftySquash

By DraftySquash,
in General Maintenance

 Share

Recommended Posts

DraftySquash Collaborator

DraftySquash

Posted
Posted

For the love of everything that is holy, how do you guys manage to get this thing off?????!!!!

I wanted to change my spark plugs today. Got everything, watched all the tutorials I could find, and read all the forums in here on steps. And then I got blocked on this coilpack cover!! Talk about feeling defeated 😕

Most guides just say it should come off after a bit of jiggling, but nothing I did worked and I didn't find any video tutorials where the person actually had to deal with the cover - it wasn't even there in most cases.

I took off everything above it. The wires towards the firewall had brackets connected to them so I unscrewed it from the cover so I could move them around. 

image.thumb.jpeg.90a0e4b12d87d6926684a1b1356a4a2b.jpeg

 

I took off the hose circled below and still nothing.

Frame1220.thumb.png.55c15d9a0e09706afe3cb716ee5e4832.png

 

I thought maybe I could get more leverage by loosening the bracket that holds the engine cover, but that didn't make a difference either. I was sliding the cover back towards the firewall to lift it up, then pulling the firewall side towards the passenger side to try get it off, but it kept hitting the piece highlighted in blue.

image.thumb.png.bfe06c60dfcb059d04f86142c2a713cb.png

I don't think this car has ever had any OEM parts changed (the black rubber connectors really need to be changed, they are rock hard), so even the wires near the firewall are iffy and I'm worried about breaking them - I've already got one OEM clamp with a wonky screw that doesn't do anything! 

Would anyone have a link to any tutorial that shows how to take this cover off? I just put everything back to how it was but I'd like to get the spark plugs changed for peace of mind. Most videos I found are for removing the cover in an RB26. The strut bar is the only thing I did not take off but the cover is not even reaching that to be the cause for all this. Same story with the rubber piece for the throttle body - did no difference.

 

I did have a peek inside the cover and saw that the coilpacks look nice and clean, and even got a cable tie around them and the plug (except for one piece of corrugated wire protection tube that seems to have been living there for while 😡). But I really want to see the state of the spark plugs and get the damn things changed! 

Appreciate any help you can give me. 🙏🏾🙏🏾🙏🏾🙏🏾

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

It is actually a bit dicky to slide out. I'm assuming you removed all the bolts on it :p

It does require a certain angle to go in/come out. When you line it up right you will see it will just slide out. You may need to take off the coupler for the throttle body to get the clearance. You may need to remove the engine cover's bracket as well.

There's a fair bit of angles and a bit of twisting to get it to slide out which I assume is the issue here.

DraftySquash Collaborator

DraftySquash

Posted
  • Author
Posted
On 15/08/2024 at 8:00 AM, GTSBoy said:

I think the fitting into the exhaust cam cover that takes the 2 breather hoses just pushes into the cam cover. Just....rotate it or pull it out?

Thanks @GTSBoy - I will see if I can rotate it. The problem is that the cover hits the circular pillar that holds the 2 valves - so unless I pull the piece out, it might still hit it.

 

@Kinkstaah Yes I did take all the bolts off 🤣
When I first saw this cover, I thought to myself "Oh I have not seen this in any videos, but how smart!! It keeps any junk from going into the coilpacks"
Pretty soon, I reverted my thought 😅

Worst case scenario, I'll take it down to a mechanic to have the spark plugs changed for me. But I will ask them to keep the old spark plugs around so I can ake some pics 

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

It absolutely, 100% can come out. Every time I took it out and put it back in in the past I had to re-familiarize myself with how it came out.

When it's the right angle, it actually comes out very easily.

DraftySquash Collaborator

DraftySquash

Posted
  • Author
Posted
On 15/08/2024 at 10:56 AM, Murray_Calavera said:

It takes about 5 seconds to twist and remove that breather.

Thanks for that! That is good to hear. I didn't want to try pull something out that should not be pulled out from the block 🤣

DraftySquash Collaborator

DraftySquash

Posted
  • Author
Posted
On 15/08/2024 at 4:33 PM, GTSBoy said:

I already told you it was a push in.

ohhh duuh! My bad @GTSBoy I read the part about turning it and completely blanked out on the "Pull it out" part 🙄

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...