Jump to content
SAU Community

Recommended Posts

I had my car for over 10 years and done around few thousand miles but never changed the oil. thinking of changing it.

 

what brand and viscocity would you put in ? people seem to use redline shockproof in the diff

 

on  contraty seen others using atf dexron 2 or 3 so wanted to check. is it 1 liter?

Edited by drifter17a
Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/
Share on other sites

31 minutes ago, drifter17a said:

people seem to use redline shockproof in the diff

No. Well, some people "seem to use redline shockproof in the diff". Most do not. I would only contemplate it if you have badly worn CW&P gears.

And no. No-one in their right mind has ever put ATF into a diff.

Any normal diff/gear oil of the right viscosity will do. Whatever takes your fancy. Castrol, Nulon, Penrite, Redline MT range. Whatever. It's just gears.

75W-90 or 80W-90 is typical. I think that GL-5 is hard to avoid these days, although I think that a GL-4 is probably preferred, given the vintage of the equipment. At least Redline offer a number of GL-4 oils.

If you have a clutch type LSD instead of the VLSD, then of course you need a proper LSD oil. Anything from any of the same names above.

If you have a helical LSD, then it does not require LSD oil, and the recco is the same as for the VLSD. You don't want the LSD friction modifiers in the oil for a non-clutch type LSD if you can avoid it.

 

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995189
Share on other sites

I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself

 

in meantime thought I change the diff oil hence post here. So any 75-90?

 

i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995191
Share on other sites

99.9% of them are viscous diffs. The 0.01% are helicals. They were only option-able in the series 2, as well.

I have redline heavy shockproof in my helical. It seems... fine? I don't think anyone is ever going to know until something really breaks and at that point I'm not sure anyone will blame the oil. I just chose it because it's extremely heavy duty and my car will see not-road-legal duty for it. I've also had sadness with various diff oils in the past sweating out everywhere and/or other 'fun' things, with clutch diffs.

Given you have a 1.5 way on the shelf, I'd not even bother with the diff in the car and just get to tinkering with it. I would spend the $90 on oil toward the labor of someone else putting the diff in if time poor even lol.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995192
Share on other sites

1 hour ago, drifter17a said:

I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself

 

in meantime thought I change the diff oil hence post here. So any 75-90?

 

i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones

75W90 GL5 is fine. If you aren't sure about the type get one with LSD additive. 

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995194
Share on other sites

2 hours ago, drifter17a said:

believe mine is helical and not clutch type.

Unlikely, as per Greg's post.

2 hours ago, drifter17a said:

During drifting one wheel was spining as if it was open diff

This is not helical diff behaviour unless one wheel is up off the ground.

2 hours ago, drifter17a said:

I want to learn shiming process and do it myself

Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion.

In case it isn't clear, I consider the process to be stupid.

2 hours ago, drifter17a said:

bought kazz 1.5 way and has sat on my shelf for the past 5 years

Nike.

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995199
Share on other sites

7 minutes ago, GTSBoy said:

This is not helical diff behaviour unless one wheel is up off the ground.

Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it.

Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical.

Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in :D

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995201
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...