Jump to content
SAU Community

Recommended Posts

So it looks like the 18th & 19th September at Phillip Island. Its a big ask but if Geoff and i get our hands dirty then im a chance. As soon as the mechanics fix my door we can get started on getting the thing running again.

And im being serious, does anyone know of a cheap daily driver getting around, Say under 2k.

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

Bring it on mate. I'll show you why the army trained me as a rapid combat repair specialist. As the saying goes "It doesn't take me all day to do a days work"

I'm now in the process of ensuring the turbo stays tight and getting the brake pedal height adjusted so the new MOMO carbon racing pedal set is perfectly positioned for H&T. Might even pull the master cylinder out and the calipers and service them all.

So it looks like the 18th & 19th September at Phillip Island. Its a big ask but if Geoff and i get our hands dirty then im a chance. As soon as the mechanics fix my door we can get started on getting the thing running again.

Roy and Geoff - Let me know when your getting into it and i'll be happy to lend a hand. :bonk:

Roy and Geoff - Let me know when your getting into it and i'll be happy to lend a hand. :bonk:

I dont hink i can supply enough Real McCoys to quench your thirst :alcoholic

Any help would be great, dont forget to bring your car, as an RB26 might be going in and we may need a few odds and ends off your car to get mine running. Troy wants the RB20 replaced, Roy wants an RB26

Roy vs Troy , who will win :fight!: ...truth is its not really up to us, it depends largely on circumstance and where things fall :P

*shakes fist violently at Roy for taking up too much of Geoff's expertise*

Maybe the two of you can help me with my RB25 when it lands in a month or so.

*shakes fist violently at Roy for taking up too much of Geoff's expertise*

Maybe the two of you can help me with my RB25 when it lands in a month or so.

When are the Super Fun Happy Slider crew going to take on Team Wang... a bit of healthy rivalry is good.

Your GTS can go up against me, you will only have to last more then one lap and they will have me smoked :goddam:

Do you need a nice TD06 for your RB25 :P

Shan we'll be done well before then mate. All help is welcome too Chris. We were a good team Saturday night :P. Without your comments I would have taken heaps longer to start bashing the wastegate with the hammer :D

Hammer...why im outraged...how dare someone show my car so little respect. Oh actually its not like you dented my door and punched my sump in or anything?!?!?! :slap:

The plan is hatched, just have to suss when the door is getting fixed and see if the spanner session gets done before or after. Im thinking before otherwise i could be waiting to late in the month.

I found the RB74/Comp2 combo great at Wakefield, no real issues all day and I did almost 90 laps. I'm using DBA4000 slotted rotors front/back on my R33 GTS-t and they weren't dusty at all. They did squeel under light braking but were fantastic... when hot. For my 5km daily trips they were overkill so i've gone back to some cheap 2nd hand standard nissan pads which... don't have any bite but do work well enough from the very first stop.

Sounds like PI is quite a high speed trap... I think I need atleast 5 pairs of underwear for the day going on the speeds you guys were doing. In the wet you would have had to drag me into the car :P

Yep, get it done early rather than later. I imagine the people involved could take quite some time to do your repair..... unfortunatly.

I'll be sure to bring along the cheap burbon.

Oh and piss off you aint getting any bits off my beast.

When are the Super Fun Happy Slider crew going to take on Team Wang... a bit of healthy rivalry is good.  

Your GTS can go up against me, you will only have to last more then one lap and they will have me smoked  :goddam:    

Do you need a nice TD06 for your RB25  :D

will a TD06 25G plus custom lowmount manifold, wastegate and hybrid intercooler setup do :P coz that's what I got sittin in my garage atm waiting for the engine and a PFC... got the PFC tuning software but no PFC lol

btw nark just got his ceffy so the Slider crew will be out in force soon.

I've just ordered a Misfiring system by Grid for the setup I'm doing... hehehe while all u wangers are lagging I'll be put-putting whenever I shift :P

btw nark just got his ceffy so the Slider crew will be out in force soon.

I've just ordered a Misfiring system by Grid for the setup I'm doing... hehehe while all u wangers are lagging I'll be put-putting whenever I shift :P

LOL... with enough corner speed you dont have to worry about lag, its only those wearing skirts and high heels who tippy toe thru the twisties that need anti-lag :box:

What do you mean by lag? At a place lieke PI you wont have to worry, i found with very little chance for practice i could drive around the poor boost response of my turbo setup. I have jack all lag, but pretty weak boost threshold.

As for while you are cornering, ppl that know way more then me have my car setup so it turns very nicely whilst im on the throttle (feathered not to the floor) so power delivery is nice and progressive on corner exit.

A place like Winton, ummm , forget about it. I think any mildly modded Skyline would be frustrated around there as there isnt too much opportunity for wide open throttle blasts.

I know I sound like an opportunist, but umm I've got a spare set of RB74s. Umm does anyone want to buy them? :P
Depends how much meat is left and how much you want;) Front and rear?

a misfiring system helps you coming out of corners too, not just on wide open throttle blasts... basically it evens out the response of a car, giving it the best of both worlds, speed of a turbo and constant response like an N/A (which I'm used to).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...