Jump to content
SAU Community

Recommended Posts

Just a quick note to let everyone know about our track day coming up Sunday 12 September 2004. There is always people who after the event say they would have come if they were aware it was on.

Details on our site.

Cost is $195 to enter and free entry into the track as all specators over 10 years old pay $10. Oran Park on a Sunday cost HEAPS, this is now one of only two Sydney Circuit Racing tracks and is in big demand. It costs around $4000 to hire on a Sunday, Public Liability $2130, Ambulance $450 or could be more now, time keeper same, events caller, pro race drivers, trophies, staff etc all adds up to over $8000. Divide that by 30 or so cars depends on how many enter and $ ? Last Oran Park Track Day we ran at over $2k loss. Company Secretary ( wife ) says get at least to almost break even or NO MORE. So we need your support. So rather than just talk about it come check it out at least or better still enter.

Plus world of difference from Wakefield during the week or other cheaper tracks out of Sydney, as no pro drivers to instruct, no time keepers with expensive transponders in each car, no events caller or trophies. It is actually very cheap for what you get compared to other similar days, in fact Half price of some.

Pro drivers we have for this one is bigger than ever.

Jose Fernandez Ford Konica cup driver and instructor for Ian Luff driving School.

John Boston very experienced driving instructor also for Ian Luff.

Aaron Lewis vast experience in racing and drives in Improved Production.

Jonathon Web who races in Porsche Cup and usually in top 6.

Yes there is heaps of laps and the biggest collection of imports at a track to compete against the clock.Also drift comp middle of the day.

Zed v's GTR or GTS-T challenge is on.

PS Steve from Just Jap looked after me on a set of R34 GTR wheels for the zed for drifting. Looks tough and every day becoming more of a GTR.

Link to comment
https://www.sau.com.au/forums/topic/50072-uas-track-day-12-september/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Jimbo Oran Park is like any other track, as long as you dont drive over confidently you will be fine. There's 2 interesting points, the line over the dogleg is blind, so you have to kinda hope you are going the right way over the crest, and the turn onto the straight has a wall.

But its a good, interesting track, even in the short circuit layout its more challenging than Eastern Creek.

Best of all, John has lined up some great instructors for the day, so take advantage of their experience. The right lines are trickier to pick up than at Eastern Creek but it's great once you get it right :P

Come on guys, let's get behind this one. UAS has always taken care of SAU now we need to get as many people involved in this as possible.

 

Go to www.nismo.com.au and download the required forms then register your attendance. This will be a great fun day.

I was going to head back up to Sydney for this, but i spun a bottom end bearing the other day at Phillip Island, so have to sit this one out...i badly wanted to go for a wrap around Oran Park as well. :rant:

These sorts of days are rare, in that a workshop puts it on, so agree people should get behind them and ensure that they continue well into the future :)

Head west along the M4 towards Penrith. Turn left off the Motorway at "The Northern Road". Follow this road for about 25-30mins until you see Oran Park on your left hand side appear from nowhere out of cow pastures :)

i don't think i will get full effect of track without good suspension setup.(lots of body roll)

Is it still worth it with standard setup?

I'd love to have a crack, as it'll be my first time on a track.

i don't think i will get full effect of track without good suspension setup.(lots of body roll)

Is it still worth it with standard setup?

I'd love to have a crack, as it'll be my first time on a track.

I still have the stock setup. True it rolls but doesn't stop you having a good time.

i don't think i will get full effect of track without good suspension setup.(lots of body roll)

Is it still worth it with standard setup?

...

Stock means you're not cheating :)

Check out the body roll:

turn2.jpg

Getting your car on the track is a hoot and not to be missed, particularly if you can get instruction.

:)

Where is Wrecked head when you need him?

Getting lots of interest in this one from all over and some tough cars coming. Appreciate your support and previous best lap times will fall.




  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...