Jump to content
SAU Community

Recommended Posts

Condolences Dave, If you like you more than welcome to bring it up for an 'unofficial' run to reclaim your title, especialally now the dyno is accurately callibrated front and rear, identical callibration to all Auto Salon Dyno Comps post last elb salon.

For those who mentioned the dyno was reading too low, the dyno was professionally callibrated both mornings of the show, just because they made more somewhere else, on a different dyno, on a different day, with different temps, etc etc DOES NOT MEAN OUR DYNO IS WRONG. Perhaps these other dyno are reading too high?

Sam.

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

For those who mentioned the dyno was reading too low, the dyno was professionally callibrated both mornings of the show, just because they made more somewhere else, on a different dyno, on a different day, with different temps, etc etc DOES NOT MEAN OUR DYNO IS WRONG. Perhaps these other dyno are reading too high?

Sam.

If your dyno cant get stock Civic to make 200fwkw then it must be stuffed :wassup:

I tried to use my car as an example to highlight dyno inconsistencies

Thanks for the offer Sam but unless it's gonna be official, I don't really see the point. It's a real shame that I knew how much power my car was making on Friday night but she failed to perform on the day. Kinda like a Sally Robbins effor really....

The car will back on the road during the week when we can find some time inbetween customers to get the piping fabricated and a new radiator fitted.

Everything else is fine so nothing else needs to be done except turn the boost back down to streetable power.

Condolences Dave, If you like you more than welcome to bring it up for an 'unofficial' run to reclaim your title, especialally now the dyno is accurately callibrated front and rear, identical callibration to all Auto Salon Dyno Comps post last elb salon.

For those who mentioned the dyno was reading too low, the dyno was professionally callibrated both mornings of the show, just because they made more somewhere else, on a different dyno, on a different day, with different temps, etc etc DOES NOT MEAN OUR DYNO IS WRONG. Perhaps these other dyno are reading too high?

Sam.

Nigel also seemed pissed off with only 510rwkw. I thought he would have pulled closer to 600rwkw this time around

apologies Dave .. someone mentiond oil ..flames .. and on the vid .. i wasnt actually there ..not much to my knowledge was said about nos "backing up" on this post ..until after my remarks.. anyways... .. i just assumed it was something more .... although it wasnt really up in the revs at the time...

with your nos setup its basically on a ON OFF switch .. not like momentary or anything that u can physically hold down? and can i ask how many bar of boost do u run to make the big figures ?

anyways regardless of that ..tough car ..good to hear no other damage and congrats on the trophy...look forward to seeing it haul ass into the 9's .. and take back that autosalon crown (whoever buys it thats if u still sell it)

Later

Matt

Again condolences Dave at least we had a nice cold coke ready for you to sit down and relax after the episode.

As for the dyno readouts Sam is exactly right just because it don't read as high as habibs dyno does not mean its not incorrect or correct who gives a **** as long as they make noise everyone is happy.

not saying that ice's dyno is leb spec either :D

and as for mr i have el guages aka INASNT stop shit stiring and ****nig other peoples arses :D

great weekend totally ****ed afterwards but all good

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...