Jump to content
SAU Community

Recommended Posts

I got 176.2rwkW on the same dyno as Duncan, same day so the results are directly comparable.

GReddy return feed cooler, Apexi PFC, GReddy Profec B Spec II set to 12psi and full turbo-back exhaust - standard turbo on unopened RB25DET. The knock sensor was going crazy (but the engine was not knocking) and the AFM was out of resolution.

Next year will be brakes, then upgrade turbo, injectors, Z32 AFM, and replace that knock sensor.

Last run: 0awkw or near enough to it....

post-39451-0-61912100-1355814519_thumb.jpg

Hoping for something closer to 400kw@wheels once its rebuilt and run in: hopefully by around Feb 2013, assuming we don't all cease to exist on Friday... ;)

Prior to this, it was running 298awkw

Last run: 0awkw or near enough to it....

post-39451-0-61912100-1355814519_thumb.jpg

Hoping for something closer to 400kw@wheels once its rebuilt and run in: hopefully by around Feb 2013, assuming we don't all cease to exist on Friday... ;)

Prior to this, it was running 298awkw

Ouch! Makes me think twice about pushing for 330kw on thursday, what was the cause?

Edited by GTR260

Ouch! Makes me think twice about pushing for 330kw on thursday, what was the cause?

nah push away then you can join the lonly I made over 300kw club in my c34 and nobody wants to know lol.

will be turning the wick up in mine early Jan hopefully see 360rwkw stock bottom end 25 yeah yeah.

nah push away then you can join the lonly I made over 300kw club in my c34 and nobody wants to know lol.

will be turning the wick up in mine early Jan hopefully see 360rwkw stock bottom end 25 yeah yeah.

We'll see how she goes, compression on it is as good as the day it was built soo for all I know she may have been rebuilt at some stage when in Japan. Not going to go past 20psi as im using the built in map sensor on the pro plug in. As for the no one wanting to know about u making over 300kw, they are just all jealous that they are struggling to make it close to 200kw. Lol,

Edited by GTR260

1998 Stagea 260RS

Standard bottom end

GT3582R .82 external gate

custom steam pipe manifold

3 1/2 inch from turbo to cat 3inch cat back

xspurt 1000cc injectors

standard head & cams

haltech platinum pro plug in

bosch 044 in surge tank

standard gtr pick up in tank

turbo tech boost controler

407.4 HP (303KW) @ 20PSI on caltex 98 safe daily driver tune

post-86035-0-78872200-1356010310_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...