Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

b324r1.jpg

b324r2.jpg

b324r3.jpg

b324r4.jpg

firstly. Are these 18" rims???? Or they just look like 18 cos they're a R32?

secondly, are the available in 18" The link Justin posted only had 17"

and are we able to confirm that the silver colour of D-Spec rims is same/similar to the silver GT4's?

cheers.

  • 4 weeks later...

i got a question if any one can help i live in the US and just bought a 92 R32 GTS-T skyline and i cant find anything for the car. when ever i use a ssearch engine it brings up skyline inspired stuff but nothing for the skyline it self. im looking for a body kit. the only ones ive found is VIS,Do-Luck, and Bomex. does anyone make a wide body for the R32? any info would be helpfull. thanks guys

BN Sports make a widebody kit for non GTR coupe models, Veilside make a widebodykit for GTR's (should be easy to adapt). Kakimoto make a widebody kit for non GTR coupes and GTRs.

I've got the BN Sports widebody kit.

well i know for $500aud you can get overfenders for the GTS/GTSt rear guards that make it look like a GTR, and you can also mount the factory GTR front guards onto a GTS/GTSt, so once youve done that you should be able to fit the widebody guards on.

Honestly if you're gonna be doin it for cheese factor instead of fitting wider rims under the guards to get more traction, then its a waste of money.

Mine's not actually on the car yet, as I'm trying to find someone to mould em before I put em on... but here's a pic of the finished product:

z_32skyline_blister_f.jpg

z_32skyline_blister_r.jpg

  • 2 months later...

yeah, they are good sh1t. like nick said BeeR had a few on their stand at TAS. there is also a yellow one featured in the current issue of HPI. according to the mag the kit price is around $10K.

  • 3 weeks later...

anyone see that B324R bodykit by Bee-R?

It's like an R32-R34 wide body hybrid, well, kinda a widebody.

It's in issue 52 of HPI, was wondering, if there was any way of getting that full kit in? (including the rims)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...