Jump to content
SAU Community

Recommended Posts

  • 3 months later...
  • 1 month later...
  • 2 months later...

Hi guys,

When I imported our 250t RS4 I needed new shocks all round so stupidly bought the cheaper BC set instead of the BR. Now they are stuffed and our use for the car has changed a little. I wonder if anyone knows whether you can fit the RX suspension to the 250t rs4 and lift the ride height? Anyone have any experience importing stock suspension direct from Nissan Japan? Or know if you can do that via local Nissan dealers?

  • 3 months later...
2 minutes ago, Long and low said:

I have a set of BC gold adjustables to go in. Seems pretty straight forward to put in. I'll be doing it in my garage on my own. 

Thanks for that. I'm only doing the springs so expect to need a spring compressor. Bought them after a couple too many, now have to work out how to do it ??

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

47 minutes ago, Hertz Donut said:

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

Thanx for that.

  • 2 years later...

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

7 hours ago, INTHEKNOW said:

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

Have a look here it will tell you the part numbers and you can see if they match. 

https://nissan.epc-data.com/stagea/

 

  • Like 1
  • 3 years later...

Are people still active on here? Never used this site before so forgive me if I’m going about it the wrong way. 
 

wondering if anybody else has encountered issues with rim to rear suspension clearance, and has any remedies or ways around it that don’t involve beating the guards or smaller width rims. 
 

picture attached (is terrible I know) is of backside of rim barrel and coil over, can basically just fit a finger in between, which is fine on anything that is flat. But anything where the front and rear are hitting opposing angles the rims rub on the coilovers which is seriously unpleasant. Can’t run any less camber or the tyre rubs on the inner guard to much, and don’t really want to lift it up high enough to get more clearance off the coilovers 

 

appreciate any pointers cheers! 

IMG_0467.jpeg

IMG_0468.jpeg

IMG_0469.jpeg

IMG_0470.jpeg

23 hours ago, RBW49N said:

Is it an rs4 or an rs4s?

tou can fit an S14/5 rear subframe and suitable driveshafts if it is a factory auto and it will give more clearance

 

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

2 minutes ago, Yeevez said:

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

It will alter the track of the car and enable you to run less camber without hitting the outer guard and give the coil over clearance 

6 minutes ago, Yeevez said:

19x9 +30 I think in the back, not to aggressive really 

weird, I have standard r34 GTR wheels (18x9 +30) on my factory auto and they fit perfect inside and out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...