Jump to content
SAU Community

Recommended Posts

Got beeped at by another Stagea owner as i was driving out of nerang towards the highway onramp this afternoon.

I totally didn't see you until you beeped. I was too busy enjoying the car as it's been 3 weeks since it's last been on the road.

Jez

Spotted a silver Axis on GWH at Blaxland last night around 6.25pm going east under the pedestrian bridge to the railway. I was crossing the road back to my car. It stopped at the lights but I couldn't get in my car quick enough to catch up. Female driver. I first didn't think it was a Stagea coming along the road. I was standing on the median strip but as it got closer realised it was a newer than mine.

Spotted a white s1 autec with a SAU sticker on the back on lower north east rd

Then about 3:15 saw a s2 with a dolphin front and nice chromies as we left HJ's -exchanged waves and flashes

Got beeped at by another Stagea owner as i was driving out of nerang towards the highway onramp this afternoon.

I totally didn't see you until you beeped. I was too busy enjoying the car as it's been 3 weeks since it's last been on the road.

Jez

Do you work in Nerang oposite the Pub???

Spotted a white RS4 on the Gateway Motorway just North of Nudgee, Brisbane. I think the plates were SSO22 or something like that. Pretty sure I've seen them before. Gave you a wave. I couldn't see you because your tint was so dark..

Do you work in Nerang oposite the Pub???

Nah. I was just coming back from my parents, out Tallai area.

I live up brisbane way and work @ coolangatta/tweed

Spotted a White RSFOUR-S in a hurry on the M1. Caught up to give a wave and backed off to safe town. Is that your normal highway speed ??? lol

I forgot to mention I saw a wine red M35 ARX parked in Church Street, Parramatta on Wednesday arvo roughly around 2pm, near the corner where the big Holden dealership used to be (either Lansdowne Street or Early Street, can't remember exactly).

passed a black series 2 on O'Sullivans Beach Rd at around 4:30 today. I only just noticed you at the last minute because I was too focused on the under cover cop that had been following me. I chucked out a little wave but you probably didn't see it

Edited by Cheddar

black S2 in my street.... went out and chatted with the new owner of Aaron from import monster's ride.... Nice to meet you Brendan, and hope to see you on the cruise on next sunday

Went out tonight to my cousins 21st at a pub out east. Spotted this in the carpark and had to park next to it.

The other half and my mother didn't appreciate having to walk a mile to the door when there were spots right out front, but hey, it was called for :whistling:.

Unfortunately it was still there when I left so chances are the owner wont know I was there. If the owners on here, thats a sweet looking ride!! I'd be keen to know what suspension your running as the stance on the back looked sweet as.

IMAG0120noplates.jpg

mine on the left.

Edited by comieodor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...