Jump to content
SAU Community

NUR Spec R34 GTR - What's the difference?

meshmesh
 Share

Recommended Posts

meshmesh Mentor

meshmesh

Posted
Posted

Tryed a search but didn't have much luck, can anyone point me to a site or tell me the difference between the NUR Spec R34 GTR and the standard models.. Also I am right in saying the only difference between Mspec & Stock Vspecs is the softer suspension and leather interior...

Evo_Lee Experienced

Evo_Lee

Posted
Posted

That is correct there are on 50 M-Spec made in 2001 and 1000 Nur (75% M-Spec and 25% V-Spec II) made in 2002.

am right in saying the only difference between Mspec & Stock Vspecs is the softer suspension and leather interior...

Off the top of my head yes basically same as the V-Spec II but different suspension internal damper setup though same spring rate and slightly smaller stabilizers...springs and shock absorbers are also gold in colour. Champagne gold colour which also follows through into the interior stitching...also the steering wheel dia is 3mm larger not that you will notice that :cheers:.

PM Rezz (Justin) I lend him a couple of my Skyline books and I'm sure the M-Specs are covered in them.

meshmesh Mentor

meshmesh

Posted
  • Author
Posted
mesh, i'll give you the catalogues for both the regular and the Nur GTR's and you can see the differences for yourself... :cheers:

Thanks Shan, I'm gunna hold you to that :D

We're sort of thinking about looking for a NUR 34.. and I guess just wanted to clarify whether 1 particular NUR model, had more "exclusivity/rare" appeal than aother.. What I did find is that the VspecII Nur had the carbon bonnet and harder suspension, where the Mspec had the softer tuned suspension and NO carbon bonnet..

funkymonkey Grand Master

funkymonkey

Posted
Posted

while looking out for cars for j-spec, I came across a White R34 GTR VSpec II Nur that next to no km on the clock since manufacture... Came with a factory CF bonnet and every extra imaginable. I can try and see if its still available if you want.

I'll bring the catalogues for both GTR's to the meeting on the 19th... you can check them out there.

MELV Experienced

MELV

Posted
Posted

meshmesh - i hope u find something. i couldnt find anything. The motor in my 33 is a 34N1 i dont know if that means is from a NUR SPEC or what ? i couldnt even find anything about the turbos mine aparantly has RR581's ? which is the larger of the N1's ?

any info on these NUR SPEC 34's would be tops

Evo_Lee Experienced

Evo_Lee

Posted
Posted
The motor in my 33 is a 34N1 i dont know if that means is from a NUR SPEC or what ? i couldnt even find anything about the turbos mine aparantly has RR581's ? which is the larger of the N1's ?

If I may...

Only BNR34 N1 and Nur use the same turbo spec:

Compressor: C106 (normal BNR34 is C100)

Turbine: GT-25 (same as BNR34)

Turbine wheel: steel (normal BNR34 as you know is ceramic)

A/R: 0.60/0.64 (normal BNR34 is 0.53/0.48)

Boost is same 0.93bars

sewid Grand Master

sewid

Posted
Posted

Yeah but the M-Spec has leather :D

Im looking into trimming my interior black leather with red stitching. Anyone know any good leather trimmers in Sydney? I saw a photo of this in GTR magazine and it looks good.

If I was going for a late model 34 I would try for a M-Spec in champagne gold. Great car and a more practical daily driver.

meshmesh Mentor

meshmesh

Posted
  • Author
Posted

Thanks for that link GTS_DUY .. I tried the Nissan jp site, but even with the translation I couldn't understand jack.

sewid, you reckon the Mspec ha and that limited colour which I think is called "millenium Jade", your the second person to say that. Isn't the Mspec for "no offence" soft coks.. ? with it's saloon type suspension? I mean I really love the leather, only wish the Vspec came with leather, as I believe it has the Carbon bonnet where the Mspec doesn't.. I guess though we'll be happy with either of them.

PS: We have a mate that owns a Nissan Dealership here in Vic, and plan on asking him whether Nissan AU would import one in for us? Anyone have any ideas on that?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...