Jump to content
SAU Community

Recommended Posts

Quote: "RB30 (japanese Spec) carillo h beam robs,"

There was no RB30 in Japan????? Except the Kaira M30 which was a stroked/bored RB20.

youre absolutely right there was no rb3o in japan BUT the Rb30 skyline 89' model was cast in japan hence (japanese spec)its not a holden block.
  • 1 month later...
  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

youre absolutely right there was no rb3o in japan BUT the Rb30 skyline 89' model was cast in japan hence (japanese spec)its not a holden block.

None of them are Holden blocks.

The "Holden" blocks were all made by Nissan.

(They all have the Nissan emblem cast into them) :D

What bodykit is that on ur car? it looks mad!

wat front bar, side skirts n rear bar is it? n how much did it cost u all up?

Looks like one of those tragic Team JetSpeed kits.

                   387rwkw from an Apexi AX53B70 is pretty good going, considering they rate the turbo at 380ps...

That dyno run was performed at 1.7 bar and the turbo was running out of steam.(started surging).I might be lookin for an rx6 soon!
                   according to my dodgy little chart thing:

 

 AX53B70 P21 = ~320ps

 Ax53B70 P28 = 650ps and ~690ps

yep i got the p28 ax53b70 , good work.
Then why was it running out of steam?
mine produced 214.8rwkw
my DYNO sheet reads 284.8rwkw  ....
Hi ya guys I t has taken me two years..blah blah blah...

producing a lazy 386.7 rwkw

hahaha

Pick a number and stick to it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...