Jump to content
SAU Community

Recommended Posts

hey how r ya all, im new and dont have a skyline yet. but they r the maddest cars around and hoping to get 1 soon. im lookin at an r32 GTR if i can find a cheap 1 through a private importer. just wondering if there r any people that kno a good price to pay for 1 and who would b a good company to go thro to import it.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/
Share on other sites

Well you probably COULD pick one up for $17,500... dunno if it'd be drivable though... You'd have to do more work than its worth to get it up to scratch if you got something at that price.

I'd suggest saving a bit more and spending ~$25,000 that way you should get a nice clean example with prehaps a few light mods.

Just my view though and I'm only a novice at importing too...

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1059727
Share on other sites

They used to be available at that price when you had to store them for up to a year before they could be brought in, but now the cars are actually landing here, the price has gone up to the early $20ks even for an unmodded one.

For some reason the price of R34s has skyrocketed also .... just when I was thinking about getting a GTR too :)

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1060829
Share on other sites

i have just been lookin on prestige motor sports and have noticed that the cheapest 32 GTR is in the 19's. looks like i will have to b spendin around 21-23 for a decent one. oh well they r mad cars and think it will b worth it, i hope! cheers for ya help so far fellas!

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061149
Share on other sites

Yea the reason the price has gone up is because they are now an eligible import, as of May or June I think and therefore everybody has been buying them, pushing the price up. Before they were cheaper, but it costs quite a bit of cash to store a car in Japan for 3 - 6 months until they're elgible to import

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061227
Share on other sites

For what? I just brought a TT Soarer over about 6 months ago and that cost bout $4500 in compliance, but that was because they were the only place in Adelaide who could do compliance and so they charged what they want. Now I think its around the $3500 - $4500 mark, depending on what car you get. Also, prices vary from state to state. However, for an '89 model GTR under the 15 year rule it only requires minimum compliance which is generally between $500 - $1000.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061832
Share on other sites

i kno it maybr illegal but does anyone kno anything bout Ghosting or rebirthing? saves the problem of having to go thro compliancing. or where i can pick up a GTR compliance plate? if so i might b able to get a 1992 GTR cheap, uncomplied so thats why im lookin for the plate.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1063445
Share on other sites

Nicely put Max. Btw, what happen to the "flying chicken?"

I bought myself a GT2540, but been rip off by the jap (rare but it happen). The turbo was stuffed. :whip:

i might put in on eBay soon with the price i pay for it, feel sorry for "someone".

Then after a few thread about the weak gearbox i am not going to bother with bigger turbo, as i don't want to downgrade to 5 speed while not able to spend 5-6k for a nismo 6 speed.

the stockie will stay and a SAFC will going into the car soon.

so from now on my money will be invest on handling side, suspenion, bar, stablizer...

while a set of R32 GTR brakes with aftermaket rotor and pad has been pushased and going on the car soon, too.

It's all going to happen after the exam. :P

i am also thinking of getting a LS400 for daily as they seems pretty cheap - black, lower, 19" chrome and killer sound system... :D

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1073596
Share on other sites

if i was to get a 15yo GTR i wuldnt worry, i was lookin at a 92 - 94. but i found another importer that does way cheaper cars including compliancing. now lookin at a 1994 BNR32 V spec. has a couple 4 sale. i wasnt gonna steel no cars, i wanted to find say a smashed up GTR and get the compliance plate off that and then import 1 and stike the place on it. that was only an idea from a mate that use to work in import yards

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1077611
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...