Jump to content
SAU Community

Recommended Posts

Hi Guys,

In the past few months i have sold my TT Supra due to buying a house. Since that time i have scraped up enough funds (about 30 - 35k) and am looking at buying either the R33 GTR ot the R34 GTT. I have not driven either.

I like the look of the GTT but am not sure about the power. Should i just go with the GTR. I want looks but i need power.

If i had the $$$ i would deff buy a R34gtr.

HELP

Brenton

Link to comment
https://www.sau.com.au/forums/topic/54120-r33-gtr-or-r34-gtt/
Share on other sites

sadly very suseptable to ricers with gtst's and seem

you callin all us ricers :) j/ks

but yea i would get an r34 gt-t especially if you are buying a house as maintenance on a GTR will cost alot more. personal preference

ps your post does only say 30 - 30k so i dont know why you sar saying "as it states 30 - 35k ???

ps your post does only say 30 - 30k so i dont know why you sar saying "as it states 30 - 35k ???

Does it matter ... it's only 5k .... not like he's saying I have between 10 and 40k so I'm looking at either a Silvia or a Supra TT Aero top !!!

I reckon of the two go an R33 GTR. Lots of power and the GTRs look great with the pumped guards and tough stance.

Try and get a Midnight purple one ...... mmmmm ........ :wassup:

You wont get a decent R33 GTR for $30-$35, though some "experts" will try and convince you otherwise.

If you want the GTR I would set yourself a budget of at least $40k, otherwise go for the GTT. While the GTR has obvious advantages, the GTT is still an excellent car.

Youll get a descent stock 95 R33 GTR for $35,000 if you look around (non vspec)

But seeing you havent driven either, ide suggest for the next few months do some serious test driving of a number of different ones, while learning as much about them on here as possible.

I wouldnt be spending more than 10K on any car unless i knew it very well.

hahah, lets not go there again :D

i've never driven any Skyline in my life, but i went out and bought a R34 GT-T. I think well know a R33 GTR and R34 GT-T are going to be great cars. But with the price you're looking at i wouldn't bother with a GTR. It would HAVE to be 1995, done a lot of k's and condition will be dodge.

$35k on the other hand will get you a very nice 1998/1999 R34 GT-T, good condition, and maybe a few basic goodies. I think the point raised about maintenance costs is very valid as well. There are a lot of 2 x parts for the GTR engine :D Also a little more expensive.

Go R34 GT-T, not really biased as i haven't driven my car and haven't driven a 33 GTR either :D

cheers.

r34 gtt and r33gtr wont have a large (but will be noticeable) difference in performance. (im talking absolutely standard)

if you modify the gtr will chop the gtt in most cases :D

how much money do you expect to spend on maintenance?

if the answer is not much get the gtt, because the gtr will cost lots to fix if things go wrong (also more chance of going wrong, and more things to go wrong!)

also insurance is more expensive for a gtr depending on how old you are the difference may change.

if you do more "spirited driving" i am sure you would enjoy the gtr more :D

I'd go the R34 GT-T over the R33 GTR any day (Well, actually, I did :rant:).

1. R34 looks better

2. R34 is newer

3. R34 is rarer

4. R34 is better value

5. Stock R34 GT-T has same power as stock R34 GTR (well - at least on paper) and you can still get plenty more out of it. R34's also have VVT

Of course the pluses for the GTR

1. Well - it's a GTR :rant:

2. More torque

3. More mod potential

4. AWD

Jarred

You wont get a decent R33 GTR for $30-$35,  though some "experts" will try and convince you otherwise.

If you want the GTR I would set yourself a budget of at least $40k, otherwise go for the GTT. While the GTR has obvious advantages, the GTT is still an excellent car.

:rant:

LW.

Considered an R32 GTR plus a runaround sh1tbox?

For your budget, you could afford a nice GTR that's already had a rebuilt motor, brakes replaced etc plus you have a car that you can leave in the pub car park on a Friday night without stressing. Also enables you to do mods/maintenance without affecting your transport reliability.

It's up to you but it works for me!

I'd go the R34 GT-T over the R33 GTR any day (Well, actually, I did :D).

1. R34 looks better

2. R34 is newer

3. R34 is rarer

4. R34 is better value

5. Stock R34 GT-T has same power as stock R34 GTR (well - at least on paper) and you can still get plenty more out of it.  R34's also have VVT

Of course the pluses for the GTR

1. Well - it's a GTR :D

2. More torque

3. More mod potential

4. AWD

Jarred

I actually think the R33 GTR look better and more modern.

Considered an R32 GTR plus a runaround sh1tbox?

For your budget, you could afford a nice GTR that's already had a rebuilt motor, brakes replaced etc plus you have a car that you can leave in the pub car park on a Friday night without stressing.  Also enables you to do mods/maintenance without affecting your transport reliability.

It's up to you but it works for me!

R34 GT-ts will become very common in the near future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...