Jump to content
SAU Community

Recommended Posts

Hi Guys,

In the past few months i have sold my TT Supra due to buying a house. Since that time i have scraped up enough funds (about 30 - 35k) and am looking at buying either the R33 GTR ot the R34 GTT. I have not driven either.

I like the look of the GTT but am not sure about the power. Should i just go with the GTR. I want looks but i need power.

If i had the $$$ i would deff buy a R34gtr.

HELP

Brenton

Link to comment
https://www.sau.com.au/forums/topic/54120-r33-gtr-or-r34-gtt/
Share on other sites

sadly very suseptable to ricers with gtst's and seem

you callin all us ricers :) j/ks

but yea i would get an r34 gt-t especially if you are buying a house as maintenance on a GTR will cost alot more. personal preference

ps your post does only say 30 - 30k so i dont know why you sar saying "as it states 30 - 35k ???

ps your post does only say 30 - 30k so i dont know why you sar saying "as it states 30 - 35k ???

Does it matter ... it's only 5k .... not like he's saying I have between 10 and 40k so I'm looking at either a Silvia or a Supra TT Aero top !!!

I reckon of the two go an R33 GTR. Lots of power and the GTRs look great with the pumped guards and tough stance.

Try and get a Midnight purple one ...... mmmmm ........ :wassup:

You wont get a decent R33 GTR for $30-$35, though some "experts" will try and convince you otherwise.

If you want the GTR I would set yourself a budget of at least $40k, otherwise go for the GTT. While the GTR has obvious advantages, the GTT is still an excellent car.

Youll get a descent stock 95 R33 GTR for $35,000 if you look around (non vspec)

But seeing you havent driven either, ide suggest for the next few months do some serious test driving of a number of different ones, while learning as much about them on here as possible.

I wouldnt be spending more than 10K on any car unless i knew it very well.

hahah, lets not go there again :D

i've never driven any Skyline in my life, but i went out and bought a R34 GT-T. I think well know a R33 GTR and R34 GT-T are going to be great cars. But with the price you're looking at i wouldn't bother with a GTR. It would HAVE to be 1995, done a lot of k's and condition will be dodge.

$35k on the other hand will get you a very nice 1998/1999 R34 GT-T, good condition, and maybe a few basic goodies. I think the point raised about maintenance costs is very valid as well. There are a lot of 2 x parts for the GTR engine :D Also a little more expensive.

Go R34 GT-T, not really biased as i haven't driven my car and haven't driven a 33 GTR either :D

cheers.

r34 gtt and r33gtr wont have a large (but will be noticeable) difference in performance. (im talking absolutely standard)

if you modify the gtr will chop the gtt in most cases :D

how much money do you expect to spend on maintenance?

if the answer is not much get the gtt, because the gtr will cost lots to fix if things go wrong (also more chance of going wrong, and more things to go wrong!)

also insurance is more expensive for a gtr depending on how old you are the difference may change.

if you do more "spirited driving" i am sure you would enjoy the gtr more :D

I'd go the R34 GT-T over the R33 GTR any day (Well, actually, I did :rant:).

1. R34 looks better

2. R34 is newer

3. R34 is rarer

4. R34 is better value

5. Stock R34 GT-T has same power as stock R34 GTR (well - at least on paper) and you can still get plenty more out of it. R34's also have VVT

Of course the pluses for the GTR

1. Well - it's a GTR :rant:

2. More torque

3. More mod potential

4. AWD

Jarred

You wont get a decent R33 GTR for $30-$35,  though some "experts" will try and convince you otherwise.

If you want the GTR I would set yourself a budget of at least $40k, otherwise go for the GTT. While the GTR has obvious advantages, the GTT is still an excellent car.

:rant:

LW.

Considered an R32 GTR plus a runaround sh1tbox?

For your budget, you could afford a nice GTR that's already had a rebuilt motor, brakes replaced etc plus you have a car that you can leave in the pub car park on a Friday night without stressing. Also enables you to do mods/maintenance without affecting your transport reliability.

It's up to you but it works for me!

I'd go the R34 GT-T over the R33 GTR any day (Well, actually, I did :D).

1. R34 looks better

2. R34 is newer

3. R34 is rarer

4. R34 is better value

5. Stock R34 GT-T has same power as stock R34 GTR (well - at least on paper) and you can still get plenty more out of it.  R34's also have VVT

Of course the pluses for the GTR

1. Well - it's a GTR :D

2. More torque

3. More mod potential

4. AWD

Jarred

I actually think the R33 GTR look better and more modern.

Considered an R32 GTR plus a runaround sh1tbox?

For your budget, you could afford a nice GTR that's already had a rebuilt motor, brakes replaced etc plus you have a car that you can leave in the pub car park on a Friday night without stressing.  Also enables you to do mods/maintenance without affecting your transport reliability.

It's up to you but it works for me!

R34 GT-ts will become very common in the near future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...