Jump to content
SAU Community

Recommended Posts

Well... it was pretty much as i suspected.

Found out the radiator is a larger aftermarket unit...

ECU is a standard R33 GTR ECU...

Sam took me for a drive (Dr_Drift) in it... well... now i know what it can do in the right hands hahaha when we got back i was a little shakey and in need of some new underpants but soon got over it :(

We finally got to put it on the Dyno and had a couple of runs... second one blowing a nice little flame but was restricted by the mixture reader in the exhaust pipe... so... we took it out ;)

and this happened :)

414flameon.JPG

http://www.skylinesaustralia.com/photopost.../414flameon.wmv - right click save as ;) its not the greatest quality but i cant actually get the video off the camera and on to the HDD so it will have to do.

Now down to the numbers :(

The car made 207rwkw on 9PSI :)

472nm torque.

Not bad figures for a stock GTR engine.... in a 1350kg cefiro ;)

Link to comment
https://www.sau.com.au/forums/topic/54320-cef-zlas-been-dynoed/
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

least my 90kw n/a dosen't tend to drop drive shafts :( I meant that car sounds n goes like it had a lot more. I genuinely thought it'd do around 250rwkw, with a very good curve that shows nice responsive tuning.

Hehe pwnd a couple of kids in a silvia around a few bends today in my old man's car, and they were like WTF at the lights. They noticed the Nissan badge and they go "we din know that nissans made powerful sedans..." so I gave them a few Duet-SS aided dori demo's in the family sedan.

lmao

of course it sounds a lot harder it has a 3" drain pipe from the front pipes STRAIGHT to the rear :D

and it can drop driveshafts cause it has the power to do so... unlike someone elses car :P

jetdat - yeah i have to go out to keysborough tomorrow to see a guy from these forums to get some work done so will be stopping by to see if anyone can help me install the part... :)

monkey - all u would need to do is ad more boost to about 12 or 13psi and tune it properly and it should easily be able to run into the mid or lowmid 200s... but u dont need it for dorifto... like u said tho it is a good base to build from.

nice ni sorry I couldnt make it I ahd every intention of being there but other shit jsut took over.

I told yu you need to go for a drive with sam he knows his shit eh :P

congrats on the figures dude . btw my pissy little sr made 221 rwkw & 748 nm of torque not bad for a 4 banger.

still a great figure for a stock motor and as you can see you dont need 300 + rwkw to drift really weel unless your name is sam

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...