Jump to content
SAU Community

Recommended Posts

Has anyone got a Caliper windback tool?

Farken rear brakes on the daily screw back into place not push and i can't get them to budge. Want to use the proper tool before i buy all new calipers :\

No. Just be sure to catch the gasket(s) or they fall into the abyss. Be sure to use a rag or something to cover the turbo outlets to ensure nothing falls into them.

Awesome! Thanks mate. Taking it off for polishing along with my Apexi intake pipes.

Has anyone got a Caliper windback tool?

Farken rear brakes on the daily screw back into place not push and i can't get them to budge. Want to use the proper tool before i buy all new calipers :\

What car and what does the piston look like? I made one for the 31 rears and it worked very well. :)

What car and what does the piston look like? I made one for the 31 rears and it worked very well. :)

Shitty Alpha 156.

$T2eC16JHJF8FFqJjjt!pBSDMKNwhE!~~60_35.J

Am going into Ultimate tunes tomorrow with the calipers and if we can't get the fkers to move im just going to buy new calipers.

Depending on materials / tools available and willingness to have a crack, shouldn't be too hard to make something to fit that.

Metal pipe, hacksaw, drill and some kind of handle / leverage springs to mind. :)

Depending on materials / tools available and willingness to have a crack, shouldn't be too hard to make something to fit that.

Metal pipe, hacksaw, drill and some kind of handle / leverage springs to mind. :)

Ill just yell at it. That will hopefully sort it.

Really not in the mood to spend $300 on the daily. Thats $300 i cant spend on the GTR

We have learnt many things today, Anthony has caliper issues on his daily, Rob has an idea if not a solution for most things mechanical (comes with artwork) ... and most importantly we have learnt that Troy reads the SAU/ACT Thread in the cr@pper!! (oh, and apparently he doesn't have a tool!)

And they say you learn nothing in car forums!!

SuperStock_1660R-8979.jpg

Edited by THE34T

Yeah good and bad. Still having boost issues, need a bigger wastegate so its staying in the shed till i do that.

Will be out ultimates way later Kyle. might see you there... :ph34r:

GTR needs to go back in but Adrian is being lazy. Will have to wait till after i go overseas now =(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...