Jump to content
SAU Community

Recommended Posts

Keen.

So... what time? 10 ish?

Ill most likely head home early too.

Fixed my brakes, it was a little bit of metal riveted to the pad, bent over to act as a pad wear alarm.

Theres enough pad thickness on there for now, but i will change it soon. I have a full set of pads waiting to go on.

How long are they out at the track for? If we aim to leave at 9 is that too early for late sleepers? And just plan to meet 15-20mins earlier then whatever time we choose to leave.

Edit: just saw miks post. 10am also works for me.

Edited by dontyellpl0x

Hey #GTRKat is your toy on E85 yet?

Nope. Making 560kw on 98.

Anyone want to come to wakefield on Saturday to see a few of the NSW peeps?

34GeeeTeeeteee is going to be there with his beast :D

Bugger, I would have gone to this but in Brissie for the weekend.

Couldnt find you guys to say "see yous later"

Saw a 4x4 and caravan on its side on the highway, just missed seeing it go over by a second or two :O apart from that it was a good day. A few Skylines there today.

Spoke to the guys that own the blue 32 GTR, nice and simple fun car to drive, makes me feel a lot better about mine, they are old cars.

That white 34 is very fast. Wow. :yes:

Missed the rain on the way home, a little bit of wet road was all.

Edited by D.I.Y. Mik

Yep, Great day Buoys. :cheers:

Got some cleanish pics but then a mysterious hair crept in to ruin them. :verymad:

These Guys and Myself.

post-78856-0-52430500-1414822140_thumb.jpg

We went here.

post-78856-0-06084700-1414821813_thumb.jpg

Saw this Guy.

post-78856-0-47238900-1414823516_thumb.jpgpost-78856-0-52255600-1414823738_thumb.jpg

and some of these.

post-78856-0-30538400-1414824439_thumb.jpg post-78856-0-75319000-1414824473_thumb.jpg post-78856-0-39325700-1414824505_thumb.jpg post-78856-0-63997500-1414824533_thumb.jpg post-78856-0-44663500-1414824562_thumb.jpg post-78856-0-93926000-1414824591_thumb.jpg post-78856-0-70636600-1414824628_thumb.jpg post-78856-0-65210000-1414827118_thumb.jpg

Lost Mik and then we did this.

post-78856-0-58462900-1414828741_thumb.jpg post-78856-0-38613200-1414828764_thumb.jpg post-78856-0-75468700-1414828788_thumb.jpg post-78856-0-38926200-1414828826_thumb.jpg post-78856-0-07157200-1414829431_thumb.jpg post-78856-0-48578600-1414828725_thumb.jpg

Unfortunately I didn't get any of the Massive Flames out of Chris's Zaust. :O

post-78856-0-79100000-1414828808_thumb.jpg

:woot:

Hey all,

Had my Twin Turbo and Apexi intake pipes polished. I installed them today.

Also have Richard's old polished plenum which has been re-polished. Thinking of trying to install it myself.

Had it done locally by OTF Detailing. His name is Dan, number is 0449049030.

post-69221-0-97437800-1414917094_thumb.jpg

post-69221-0-88238800-1414917144_thumb.jpg

post-69221-0-07269300-1414917189_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...