Jump to content
SAU Community

Recommended Posts

Hey guys,

I've got a question.

Barring all monetary and budgetary restraints, what would be the ultimate turbo for the RB25DET.

Not for ultimate power, as we all know you could just strap a monster to the side of it and make power from 6500 - 8000 rpm.

I'm especially interested in you tuners points of view, STT and SK.

Highest average output, best spooling etc. etc.

Interested to see answers.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/55255-the-ultimate-turbo-for-your-rb25det/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Bass, just comes down to how much power you want out of your engine... just look for the quickest spooling turbo which can get you the power your after. 3037's will get you nice power but is it worth sacrificing it for better response?? its up to you

Bass Junky, it might help if you were to give an approximate rwkw figure.

I would have thought 250-300 rwkw is enough, as I have not seen anyone with more than this get it down smoothly on a street car (but I may be wrong) IMHO over 300 rwkw is 4 wheel drive territory unless you are into lots of wheel spin and chewing up tyres.

I also realise that the shape of the power curve will allow cars with less power to light up, but a properly tuned (smooth and progressive power curve) motor with this sort of power should be drivable on the street.

Probably a nice low mount GT2540. Good response, minimal lag, and nice and stealthy low mounted. :)

You gotta be kidding, the 2540 is one mismatched comp/exhaust side turbo ever.

Bass

For an example at sandown on that sunday running around 255rwkw with my GT30 0.70 a/r comp 0.87 a/r exh i found that coming onto either the front or back straights at around 60 km/h in 3rd at around 3000rpm i had lag issues till i hit just over 4000rpm and came onto boost. If i took these 2 corners in 2nd instead i found that i would get wheel spin and axle tramp instead. I went for a ride in skylinegeoffs car before that and he could use 3rd coming onto those straights with his 'hydrid' turbo and come on boost straight away, but my car felt alot quicker on the straights.

Do you plan on joining the wang soon or just street driving?

I'm with B-Man.

The 2835ProS is an awesome turbo that is just right for the stocker internals.

Excellent response & average power.

To push upwards of 280rwkw od I would either do cams to lower bring the dynamic comp ratio to a safer limit or slap a thicker head gasket in there which effectively also lowers dynamic comp.

Obviously a set of injectors are on the cards.. But thats nothing a set of second hand GTR injectors + a resistor pack can't solve.

So... I would..

2835ProS

Nice FMIC & Exhaust

GTR injectors & Resistor Pack

Fuel pump

PowerFC

Z32 AFM

See how the power is then look at cams to make the motor a little safer and also increase the average power. :D

What do you guys think of the HKS GT-RS, for track use. Rated at 400ps , the hks GT2835 Pro S is rated at 420ps.

Seen it on nengun as a bolt on kit for the RB25det's

http://www.nengun.com/product_info.php?pro...4b067d1b19ad51a

So theres not much more difference between the gtrs and the 2530..And the 2535 is the turbo to go for for decent response excellent mid and good top end for rb25.

Spewing we will have to wait and see what croat can pull out of his hat.I was allready like this turbo is the one for me.What sort of price can the hks 2530 2535 etc be recoed back up for??

:)

With everything else in order, so you get the most out of the turbo in its efficiency range.. probably 2835 Pro or 30xx series

you should choose the best turbo for your intended/current setup, not the best turbo in general for rb25det

or something like that :)

hey peter that turbs doesnt look too bad!

Ide like to see some info on its actuall performance on rb20/5 sr20 etc

building a RB25DET with a TD06-25G, nice laggy turbo with good topend power, and a misfiring system to keep the turbo spooling while I'm off the throttle. The one that I've bought is a metal sleeve thingamajiggy (can't remember the name) so its not steel bearing or ceramic, and can withstand a lil bit more punishment than a standard turbo.

As a standard swap/upgrade for a R33 RB25DET i'd say get a 2530, but I dunno how they react to RB25DET Neo's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...