Jump to content
SAU Community

Recommended Posts

R33 - 1998 Series II GTSt

Stock Turbo - boost 12psi (bleeder)

FMIC

APEXi Pod

Power FC (Hitman tuned)

3" turbo back zorst

194.6 rwkws (feels awesome !)

Recently

Upgraded to HKS 2535 but only on R32 actuator 10psi.

Needs a retune but feels nice.

Can't wait to hit around 250rwkws.

Have GTR fuel pump, S15 injectors and Z32 waiting to go in. Yeehar !

Doing everything myself which can be slow going but very rewarding.

iLEC : Looking forward to your results dude :)

1999 R34 GTT 2 Door Coupe

Stock Turbo

Power FC

12 PSI boost with AVCR

FMIC

3inch Turbo Back exhaust + Screamer Pipe

Apexi Pod Filter

= 218.7RWKW

1234dynosn4.jpg

Edited by anDru

R33 gts-t

apexi power fc

blitz frount mount cooler

nismo fuel pump

z32 AFM

AVC-R

Split dump pipe

Custom Garrett highflow turbo

Thermo fans

Stock internals

Stock injectors

256 rwkw at 1 bar

Will post new dyno sheet when I scan it in.

Thanks to Paul Fisher at Pulse Racing (Menai - Sydney) - Definately knows his stuff, i would not go anywhere else.

R33 gtst s1

wiseco pistons 20thou

acl race bearings

Trust 1.4mm head gasket

gates timing belt

walbro fuel pump

700cc inj

power fc

avcr

GT3040 .63

s/s manifold

tial 38mm external wastegate

bov

k/n pod

4" intake pipe

Q45 afm

custom fmic

full 3" exhaust

Just tuning no power runs as such we made 240rwkw on just under 14psi, due to missifre problems we couldnt wind the boost up anymore and get some good power runs DOH

Next mods....tomei poncams

splitfire coils and more boost

Edited by sinistagtst

ECR33 Type M

Blitz LM FMIC

Turbo-back 3" exhaust

Splitfire DIS coils

APEX'i Power Intake Pod filter

UAS cold air box

GReddy Profec B-Spec II

GReddy e-Manage Ultimate

Tomei exhaust cam gear

Walbro fuel pump

0.85bar

205kW

http://members.optusnet.com.au/govich/after.jpg

Edited by govich

rb25 s2

wolf v4

fmic

040

blitz sbc id3

3" straight through with highflow cat - no mufflers

old turbo off my rb20(highflow n shiz)

555inj

gates timing belt

ss intake pipe(fluuttEr yo)

stock internals

sticky wastgate

200kw

to come;

custom cai and a fixed wastegate!

hks 3037 pro s turbo with custom housings..

big shout out to vic at EAS Performance!

S13 Rb25 DET

Stock internals

Stock turbo

Apexi Power Intake

FMIC in and out on the same side

Microtec LT12S

Splitfire coils

BATMBL dump and 3 inch Exhaust

12 psi boost HKS EVC IV

Bp Ultimate

Bosch 044

Malpassi

=209rwkw

96 series 2 r33

3 inch turbo back

fmic

stock turbo I think (has steel front wheel maybe series 1 turbo???)

profec b boost controller 12psi

high flow fuel pump

174.8 rwkw on 9 psi and 200.2rwkw on 12psi

havin trouble uploading at the moment.....

1996 Series 2 R33

Mods I have (In order of installation):

Car came with:

3.25 inch cat-back. (1998 5Zigen Border series)

K&N Pod filter.

Blitz SS B.O.V.

Mods I have installed so far:

Custom 3 inch dump pipe

Metal-cat (Magnaflow 650 CFM cat)

Garrett GT3076R w/IW turbo

Turbosmart Boost T

Hyperperformance Automotive FMIC (ebay choina)

Cold Air Induction (To underneath of pod from front bar.)

Exedy heavy duty organic clutch kit.

Will start at 8psi then go to 10psi then 14.7psi once more. Was running 1bar (14.7psi) before my clutch eventually wore out from slipping, I suspect I have a Fuel Cut Defender that I am not aware of.

Dyno this Friday if all goes well.

Edited by Pauly33GTS-t

R33 Gtst S1

Results as per my signature... currently 226.5RWKW (will scan dyno sheets in tonight)

More goodies being installed currently with ECU to be installed next week:

555 Injectors

External fuel pump

FPR

ECU (Adaptronic)

Custom Plenum

Metal Headgasket

Cam Gear

Cam Shafts

New hoses throughout engine just incase lol...

GT3540 for when Stage 3 highflow is max'd out

And then..... wait for stock internals to crap themselves before installing a RB30 bottem end :) (Dad won't help me build the bottom end whilst there is a perfectly good one still working in the car :P)

S1 1994 Gtst

Stock auto ecu (had manual conversion)

Stock turbo @ 11 psi on GBF bleed valve

Stock internals

Gates timing belt

Fmic

SAFC2

Split dump, hi flow cat, 3" cat back(front pipe still to do)

Xtreme 9 puck clutch

K&N panel filter

550hp warlbro fuel pump

271rwhp or 200rwkw

  • 2 weeks later...

R33 Gtst AUTO..Dyno'd at hitmans

-s2 running gear

-exhaust, split dump wrapped/two mufflers old cat, quiet restrictive.

-FMIC (copy hybrid)

-Hi-flow turbo (hi-flow front, vg30BB rear)

-rb20det acuator, running 10-12psi.

-SAFCII

-Pod Filter (not enclosed)

-Stock everything else

-BOOST98 fuel from United servo's.

234.9rwkw@10-12psi (315rwhp)

Please Note: Done in 3rd gear, car slowly ramped up in 3rd so it would not kick back into 2nd.

post-28122-1177649166.jpg

R33 S2 97

Mods:

FMIC

Splitfire coils

Walbro fuel pump

PFC

3inch dump to back (just found out that the cat is still 2.5inch!)

Stock turbo

Stock internals

Tuned by JEM, had over 200rwkw at 14psi but knocked it back to 13psi for a safe tune,

196.4rwkw.

Next mods to be made,

GT3037 turbo

Tomei poncams

550cc injectors

Anyone care to guess how much i'll be making then?

post-25507-1177649949.jpg

Okay just had a re-tune and it made 198rwkw at 12psi.

Edited by AdamsR33

In response to the call for a stock turbo dyno sheet, mild mods. See link below.

94' ECR33 gts25t Type M

KLS 600x300x76 FMIC

HKS Exhaust from dump, 3" to 3.5" superdragger High flow cat (was on car from japan, other than that it was stock)

K&N Pod.

AVC-R EBC.

it made 194rwkw @ 6200rpm. = 260.3 rwhp @ 13psi .

*after looking at the Dynosheet I noticed my AFR's drop quite low. Need a good tune as its runnin a little bit rich.

http://members.optushome.com.au/nastradama...dale260rwhp.jpg

this is my benchmark, will be udpating with all new mods when santa arrives :blink:

Edited by silverbulletR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...