Jump to content
SAU Community

Recommended Posts

ATR43G3 .82 with high pressure actuator:

800cc injectors

Nistune ECU

Z32 AFM

600x300x75mm FMIC

3inch turbo back exhaust

3inch intake pipe with pod.

CP pistons

Stock engine head

Stock cams

Stock cam gears

Stock exhaust manifold

Stock inlet manifold

Stock fuel rail

Stock engine block, Con rod & Crank.

This is a controlled run based on BP 98 Fuel, No boost controller, No wastegate controller.

atr43g3303rwkw.jpg

atr43g3303rwkwboost.jpg

Video of above run is up for people whom's interested to watch:

R33 GTST turbo PU high flowed .82 with high pressure actuator:

800cc injectors

Nistune ECU

Z32 AFM

600x300x75mm FMIC

3inch turbo back exhaust

3inch intake pipe with pod.

CP pistons

Pu high flow .82

Stock engine head

Stock cams

Stock cam gears

Stock exhaust manifold

Stock inlet manifold

Stock fuel rail

Stock engine block, Con rod & Crank.

puinstall1.jpg

puinstall2.jpg

Video of 3 dyno runs:

Final result:

puhf305rwkw.jpg

puhf305rwkwboost.jpg

powerve.png

rebuilt RB25 with forged pistons etc

GTR Injectors

Z32 AFM

Nistune + RB20 Computer

VCT running via eboost-street between 1500 and 4500rpm

Running 18psi on a GCG highflowed RB20 turbo

Full 3" straight through exhaust with one muffler, split pulse dump pipe.

Makes 236kw @ 6300 - 7200rpm on 18psi, drops down to 15psi by redline due to the tiny exhaust housing.

Makes 210kw on 12psi at similar rpm.

rev limit at 7500rpm

think the dyno is fairly low reading as the car is an absolute animal to drive, turbo has basically standard response and absolute zero lag, can make about 6psi by 2500rpm, full boost by about 3-3.5k

1993 R33 series 1 GTS-T

Hypergear ATR43G2 highflow turbo (0.82ex 0.60A/R)

Nismo 740cc injectors

Bosch 044 mounted in tank

3" Just Jap dump/front pipe, unknown rattly cat (probs gutted/fked compliance or something), 3.5" catback

Splitfire coilpacks

ViPEC v44 ECU

Large FMIC

3" metal intake, pod filter, fibreglass cold air box w/ heat shielding inside

284rwkw @ 15psi on PULP98

R32 with Rb25 with all standard internals

Gt35/40 with 63 rear

6 boost manifold

tiall 44mm external gate

sard 850cc injectors

split fire coils

2 1/2 " exhaust

race cat

haltech e11 v2

blitz dual solenoid boost controller

bosch 044

running 23 psi made 398 rwhp for a year

turned timing down still on 23 psi making 387rwhp

pump fuel

post-77086-1285330381_thumb.jpg

Edited by jordy86

ATR43G3 twiked version in .82 with high pressure actuator set at 17psi:

R33 RB25det fully stock

800cc injectors

Nistune ECU

Z32 AFM

600x300x75mm FMIC

3inch turbo back exhaust

3inch intake pipe with pod.

98 Fuel.

atr43g3p2290rwkw.jpg

R34 GT-T

RB25DET Neo

Hypergear ATR43G3 hi flow, standard nissan compressor housing with 0.82 exhaust housing.

3" Turbo back exhaust

Custom 3" to 2.5" intake with Apexi Pod Filter

Trust Turnflow Intercooler

Z32 AFM

Nismo Fuel Pump

Deatschworks 800cc injectors

Nistune

BP Ultimate 98

279.5rwkw @ 15.8psi, couldnt get the turbo to hold 17psi to redline. Should be some more top end power once we sort that out.

HUGE thanks to Trent from Status Tuning and Tao from Hypergear!! The amount of time they both spent helping sort out issues such as twisting intake pipe, changing spark plug gaps, trying different actuator settings is much appreciated.

post-29432-1285889756_thumb.jpg

post-29432-1285889772_thumb.jpg

R33 Gts-t Series 2

unopened rb25det

Garrett GT3076R .82

RB25DET

Hybrid Front Mount Intercooler

3A Racing Pod Filter

Nismo 740cc Injectors

Z32 Air Flow Meter

Custom 3 inch metal intake pipe

Garrett 3 inch Dump pipe

Modified 3inch JJR front pipe

Fujistubo 3 inch Catback

Greddy Cam gears

Bosch 040 Fuel Pump

Ported Exhaust manifold

Blitz Dual SBC spec r

All controlled by an Apexi Power FC

Making 281.1rwkw with 19psi dropping to 18psi

Next is E85 ;)

post-8025-1286332991_thumb.jpg

  • 3 weeks later...

Nothing new here

But i picked up one of those GCG 3071r copies s/h not realizing at the time how much different it would be

Feels good but wishing i had the genuine garrett now, of course, hindsight is a wonderful bitch

Full boost comes on a bit later than I'd hoped, around 3800rpm. But its done now... :P

@18psi, tapers down to 16psi

DSC01688.jpg

Edited by Arthur T3

Duel ceramic Ball bearing OP6 R34 Neo turbo high flow

R33 RB25det fully stock head and forged bottom.

800cc injectors

Nistune ECU

Z32 AFM

600x300x75mm FMIC

3inch turbo back exhaust

3inch intake pipe with pod.

98 Fuel.

op6highflow321rwkw.jpg

Video footage

  • 2 weeks later...

Duel ceramic Ball bearing ATR43G3 Prototype 2

R33 RB25det fully stock head and forged bottom.

800cc injectors

Nistune ECU

Z32 AFM

600x300x75mm FMIC

3inch turbo back exhaust

4inch intake pipe with pod.

98 Fuel.

Power curve of last two runs. (car's developed a valve bounce issue)

atr43g3300rwkw.jpg

Boost

atr43g3300rwkwboost.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...