Jump to content
SAU Community

Recommended Posts

Sometimes when you watch the odometer tick over, it looks like it's jammed then quickly flicks over.

Bushes are the best indication cause dodgy people don't change them, mainly the obvious like gearknobs, steering wheels and pedals with aftermarket stuff.

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-85599
Share on other sites

Well if it stops on the next thousand/10 thousand.. It usually means its been played with :P

We've had this happen to ours. One time it just stopped and didn't move for 400k's. So we took it to the mechanic and he fixed it and said it has been wound back a fair way. Every now and then it stops.. then it starts again :P

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-85774
Share on other sites

Clock winding is way too common. The drivers seat is a good indication as mentioned. Also the steering wheel and the gear knob, as they wear the most.

Ive seen TOO MANY imports with completely worn steering wheels and gear knobs, very worn trim etc, only to see 50 or 60 grand on the odo- and the dealers seriously expect us to believe they are genuine k's! Maybe they believe it themselves.. A car with 50,000 genuine ks should be practically new. This is considering many imports with 90,000 ks can still clean up pretty damn well.

Its a worry. Or you get a car in seemingly near new condition, that has a noisy timing belt indicating 100,000!!

Bottom line is too many dodgy operators. Apparently it happens in Japan, and not by people here when they land.

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-85801
Share on other sites

Originally posted by zerorespect

it's always buggered me why every1 (nissan, honda, toyota, etc)hasn't gone to digital odometers - maybe controlled by a box marked with the chassis/vin number of the car to hamper swap overs...

Its so they can send them over here and make some $$ :)

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-86208
Share on other sites

Mine's 93 with only 32,000km on the clock when I bought it... some of the numbers are not aligned which maybe coz it's been wound back prob in Japan or somewhere here. But all the interior trim, steering wheel, etc etc are in immaculate condition, so could it be that cars with original km still have numbers on the odo misaligned as well? The odo is runnin smoothly none of the above probs happen so far. I haven't check the suspension bushes thou, not sure how to look at them.

But I travelled a lot... 7 months ownership & now I've travelled 9000km in it....

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-86677
Share on other sites

Originally posted by rs73

Mine's 93 with only 32,000km on the clock when I bought it... some of the numbers are not aligned which maybe coz it's been wound back prob in Japan or somewhere here. But all the interior trim, steering wheel, etc etc are in immaculate condition, so could it be that cars with original km still have numbers on the odo misaligned as well? The odo is runnin smoothly none of the above probs happen so far. I haven't check the suspension bushes thou, not sure how to look at them.

But I travelled a lot... 7 months ownership & now I've travelled 9000km in it....

Mine was basically the same.. had 33000km on the clock and

everything was still sweet.. but definately the clocks been

played with cause I've had to change my clutch after 11000km..

But these engines are so robust... I've done 30,000 in 10 months

and this thing is a weekend driver...

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-86836
Share on other sites

It happens to so most imports i'd say... mate bought a 96 GTS25t skyline in immaculate condition.. showed 11,000km on the clock, seemed close to it aswell. His clutch died completely within a week of driving the car normally. We later saw the exact car on prestigemotorsport website after it was imported (with perth plates on it, rego sticker), saying 52000km. It was owned and driven around in perth for a while then sold to a dealer who my friend bought it off, so it would have been wound back here. No way a clutch on a totally dead stock r33 is going to fry itself to nothing within 11,000km of its life, unless it has been thrashed mighty hard since new, but since the car was stock you would doubt it.

Link to comment
https://www.sau.com.au/forums/topic/5663-wound-back-od-meter/#findComment-86862
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...