Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

From my knowledge... Any ECU will work in an auto 33 Skyline... They just don't change gears properly... The shift from 1 to 2 is HARSH!! And it holds gears too long and it doesn't kick down...

This is definately the case with the Wolf Plugin and more than likely the case with the PowerFC...

I'm in the process of working out which signals need to be brought across to the auto ECU to "help" with this problem... It will never be perfect though, but some gains have been made...

hey im pretty much in the same situation

haave an auto r33

i was wondering with the haltech ecu i think its the e6X

if ya can put that into an auto, i'll find out more info but

yeah at the moment thats what im goin to do with replacin the stock ecu

just got the t04E hybrid turbo

be doin front mount soonish

and will have to find someone who can do a custom manifold for a good price .

From my knowledge...  Any ECU will work in an auto 33 Skyline...  They just don't change gears properly...  The shift from 1 to 2 is HARSH!!  And it holds gears too long and it doesn't kick down...

 

This is definately the case with the Wolf Plugin and more than likely the case with the PowerFC...

 

I'm in the process of working out which signals need to be brought across to the auto ECU to "help" with this problem...  It will never be perfect though, but some gains have been made...

Yeh ive done some research into this aswell and found that NO stand alone management works properly with the automatic gearbox. There is no gear logic code (thanks sk) :(

Been in autos with a wolf and powerfc now, wolf was better but still too much for me.

We know that the only way to have control over fuel and timing on the automatics without any change in the gear logic etc is to use piggybacks - most commonly SAFC2+SITC. Ive been told by a few people now that tuning the SITC does not affect the autobox at all, making it the only device i know of able to controll timing properly on an autobox without affecting it.

Obviously this limits tuning capacity and capability,

by only having about 260rwkw (highest ive found on standard ecu with piggybacks) of power available, only +- 50% fuel cotrol and timing control of 5 increments (800, 2400, 4000, 5600 & 7200rpm) with adjustment upto +- 15 degrees.

We know the SAFC2 can work with a Z32AFM in an automatic, well pretty certain anyway :)

And that larger injectors CAN be used by tuning the SAFC2 but its still uncertain how well they will work and what problems will occur when only being about to controll the air/fuel ratios to run the injectors.

Thats bout all i can think of :wassup:

in this thread

http://www.skylinesaustralia.com/forums/sh...t=automatic+ecu

sst in perth seem to claim that the wolf plug in will work perfectly with no splicing on a r33 auto . does anyone have concrete info contrary to this ?

my fav autronic tuner in perth claims he can get an autronic shifting perfectly also . he also is working on a remapable nissan ecu replacement , using a different ecu modified to work in the r33 . Im inclined to belevie him on the autronic as he knows his shit and had some very hardcore s13 autos running them

arkon i have wolf in my auto 33 and steve convienently doesnt say anything about any shifting problems with the auto.......... but my gears hold much longer then they should the kick down didnt work properly and 1-2 gearchange is harsh

i bought this unit under the pretense it did work perfectly with the auto as that what a workshop in perth told me..... hmmmm

Yes I have been going through this for a while I currently have a Wolf3D but I still haven't got it installed as yet just waiting for my intercooler to turn up.

I have tried the Power FC and it was harsh I have tried the wolf but just with steve-sst base map it was harsh but not as harsh as the power FC still needs some tuning.

Now people are saying that there wolf ecu are not working properly with there auto ecu and the gear changers are still harsh, I really didn't want to hear this.

Maybe Auto Skylines are supose to stay stock :( and just look good.......................

When the gearbox changes gears it tells the ecu to drop the timing and/or fuel momentarily so that the power is dropped and the gearbox doesn't suffer on the change.

ECU's like PFC and Wolf don't do this so you will probably eventually blow up your box.

I have a chipped ECU in my R34 tiptronic.

arkon i have wolf in my auto 33 and steve convienently doesnt say anything about any shifting problems with the auto.......... but my gears hold much longer then they should the kick down didnt work properly and 1-2 gearchange is harsh

i bought this unit under the pretense it did work perfectly with the auto as that what a workshop in perth told me..... hmmmm

how much of this could be controlled buy tuning the wolf , would some wolf installs be better than others ? or is it a matter of its just not possible because of hardware.

perhaps a manual conversion will come sooner rather than later

i am enjoying the lazyness of the auto though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...