Jump to content
SAU Community

Recommended Posts

My RB20 is dead.Second gear burnout at 7000rpm broke something in the bottom end.It sounds like a rex and knocks very bad.I'm not sure if I should just get another 20 to put in,rebuild my blown one with forgies etc,standard RB26 or RB30DET?

My RB20 is dead.Second gear burnout at 7000rpm broke something in the bottom end.It sounds like a rex and knocks very bad.I'm not sure if I should just get another 20 to put in,rebuild my blown one with forgies etc,standard RB26 or RB30DET?

go a rb30et bullay, they orse engines unna. My cousin edwin had one in his vl and she used to move out!

go a rb30et bullay, they orse engines unna. My cousin edwin had one in his vl and she used to move out!

RB30ET suffers from 2 diseases;

1. Insufficient camshafts

2. Insufficient valves

:rofl:

Someone should make a thread like that RB25DET one with dyno results of different turbo upgrades for the RB20 =) 260kw is a bit out of my league but i'm aiming for 200rwkw... it'll be a nice upgrade from my old Pintara Ti. Just a quick question which one of you more knowledgeable guys might be able to help me with- My car has the following performance mods;

Aftermarket Front-mount Intercooler

BLITZ Dual SBC (Electronic Dual Boost Controller)

R32 GTR Fuel Pump

Hi-Flow 3" Cat Converter

Height Adjustable Suspension

Front Pipe

3" Turbo-Back Exhaust

APEXi Pod Filter (Building airbox and CAI)

GTR Aluminium Bonnet

I plan to get the following at some stage (money permitting)

R32 GTR Injectors

Power FC

Z32 AFM

Heavy duty clutch

Turbo (Either a standard R33 or 2530)

Just curious what you would recommend I upgrade next? As far as I know the car is still running a completely un-altered standard ECU. Should I invest in a Power FC? GTR Injectors? Z32 AFM?...Clutch? hehe. I don't have the cash to get everything at once.

Also has anyone modified the intake on the manifold so that it faces that front? I was reading that will give an increased throttle response due to the shorter distance the air has to travel, but when I mentioned it to my brother (mechanical engineer) he said there might be a possibilty of uneven air distribution as a result of moving it (i think that's what he said hehe) Anyone know the price of getting it modified?

lol nice tune man... u were getting 270ish at wheels with the 2535 and it died?

hrmm... unlucky i guess

im running 235hp with stock rb20 turbo from a tuning shop where everyone bags and its still runnning good.

Good luck with next motor choice!

My RB20 is dead.Second gear burnout at 7000rpm broke something in the bottom end.It sounds like a rex and knocks very bad.I'm not sure if I should just get another 20 to put in,rebuild my blown one with forgies etc,standard RB26 or RB30DET?

I wont now what happened till I open the motor up.One thing i noticed on start up yesterday is it had like no/very very little oil pressure!!Maybe the oil pump bolts went?they come loose sometimes don't they?

lol best rb20 skids ever! bugger about the break hope it is something minor. Got pretty much the same setup cept a lumpy rom (very conservative tune) and r33 turbo. Pulls 250hp atw on 1.1 bar. need a front/dump pipe, PFC and gtr injectors and hopefully push towards 280. then its on to a stainless mainifold and GT-Rs turbo :D

Yes with that turbo it wudnt be a daily driver!! Thats for sure lol

 

Dont agree, it sounds as though we are running the same turbo, and i use my car to drive to work, the video shop, the pub (but not home:)) i drive interstate with it...and the thing is fine for everyday driving, these days i dotn wind boost any lower then 14-15psi and about 215rwkws. When i want some fun i wind it up to 1bout 17-18psi for about 235rwkws.

Its a great daily driver....nad from what i have read and seen of some others results it makes boost/power as early as a Hi-flow but comfortable makes more power...so until i see soem results of a 2835 i think the TD06-20G is about the perfect street /track turbo for the RB20.

If you want bottome end punch and dont want to track it then id say look at a hi-flow, 2510/2530/GT-SS etc etc etc...but the 20G aint too big :O

Hey Roy, just a few questions, u have a rb20 with a td06 20g right, and u made around 250rwkw,

what psi did u use, what other supporting mods do u have, did the tuners say the turbo had much more left in it rwhp wise.

At 14/15psi i make 215rwkws, 1t 17/18psi i make 234rwkws...adn at 22psi my car made something like 260odd rwkws.

Quick punch lis tof mods:

- TD06-20G Greddy turbo, with Type R Wastegate and Greddy SS exhaust manifold

- GTR Injectors

- Power Fc

- HKS Type S intercooler, HKS air filter and HKS Hyper exhaust

Its pointless comparing dyno figures, but i dont think my power figures are way out at 235rwkws as i ran a 114mph at the drags with 17/18psi

...and R31 POWER, bugger mate, shame to see you did an engien. It looks like you were doign a pretty god brake job in it...what were teh water temps and knock levels like on the handcontroller?

Looks like I have a cracked exhaust manifold or a few snapped studs, as when mine comes on boost its making a strange whistling noise and you get a ig whif of exhaust gas smell in the cabin

Whacked a log (yes log, not a branch lol!) overtaking a car a month or so ago, I had to get the dump pipe replaced, as it was dented to all hell

Can only smell it on boost, so I reckon its a leak

On a more positive note, I did a bit of backyard tuning to stop a bit of detonation I was having, the car feels nice now, spins up 235 wide 17's in second as soon as it comes onto boost now, so its a bit of fun

also, one thing to note, just clocked over 10,000 kms mark running at 1.3-1.4bar, and 158,000kms on my motor ;)

Bummer to R31 POWER, don't loose the RB20 faith mate, stay true! Whack another 20 in there!

Dont agree, it sounds as though we are running the same turbo, and i use my car to drive to work, the video shop, the pub (but not home:)) i drive interstate with it...and the thing is fine for everyday driving, these days i dotn wind boost any lower then 14-15psi and about 215rwkws. When i want some fun i wind it up to 1bout 17-18psi for about 235rwkws.

Its a great daily driver....nad from what i have read and seen of some others results it makes boost/power as early as a Hi-flow but comfortable makes more power...so until i see soem results of a 2835 i think the TD06-20G is about the perfect street /track turbo for the RB20.

If you want bottome end punch and dont want to track it then id say look at a hi-flow, 2510/2530/GT-SS etc etc etc...but the 20G aint too big :rant:

Well i figure i will run about 10-12 psi for daily driving and just wind it up for club/race days or when i want to have a bit of fun.

What yours like on fuel consumption Roy???

In Sydney driving approx 120kms a day, livingt at Richmond, working in Chatswood i was getting about 410-430kms before the light was coming on. Driving up from Melb i was over at about 400kms with still plenty on the dial, but filled up as didnt want to get stuckbetween Albury and Goulbourn:)

So economy is pretty good as long as im not getting stuck up it.

edit... Just worked out fuel economy. Pure highway driving i get 9.2L/100km. City driving i get 11.2L/100km, thats putting around never using more then 50% throttle and 3,500rpm so always off boost.

Roy - I was a dick and did'nt let it warm up enough before the show,water temp started at 49degrees and when the motor stopped it was 99degrees.Knock went up to 90 but I was'nt watching the controller so dunno if it only hit 90 once or what.

Chris32 - I was thinking other motors but I'm leaning towards another 20,gotta love the big revs!!I hope my next motor lasts longer :rant:,I'll look after it more since I've had my fun.

i made 298.7 @ 16.5 psi on sat... dyno dynamics

car had been on dyno for about 2 hours tuning so intercooler was getting a bit heat soaked and piping was fairly hot. would have cracked over 300 easy when not so hot

full boost at about 4100-4200 ish and holds dead steady all way to 7500

car drives heaps better now, lots more responsive and a little more top end, fuel is about 11.3-11.7 afrs and Power FC knock count doesnt go above 35 so is very safe.

will post power graph on friday as i dont have a scanner here. will get tuned again in a little while at 18psi and will hopefully get between 320-330rwhp

Roy - I was a dick and did'nt let it warm up enough before the show,water temp started at 49degrees and when the motor stopped it was 99degrees.Knock went up to 90 but I was'nt watching the controller so dunno if it only hit 90 once or what.

Chris32 - I was thinking other motors but I'm leaning towards another 20,gotta love the big revs!!I hope my next motor lasts longer :P,I'll look after it more since I've had my fun.

Damn, cold motor, big revs and load = big bang! I'd go another 20, at the end of the day, its only a car, it will wear out again, and you can have plenty of fun with the 20. I could'nt drive my car the way I do if I had 10 grand worth of RB25/6 under the bonnett, but knowing its only a bit over a grand if it does shat itself, it makes it more fun. I'd be to worried about nuking it if I had a big dollar motor, to much pain if it shits itself

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...