Jump to content
SAU Community

Recommended Posts

Be interesting to see the power the thing makes at 4,000rpm and again 4,500rpm. It could be finally enough for me to remove the TD06?!?! At 25psi , 274rwkws and 0.63IW housing how is the boost curve. I imagine the back pressure muct be pretty high in the housing, what ignition is in the engine up top?

  • 4 weeks later...

So after nearly 3 years off the road i finally have the new motor in the car :P

New set up is:

Rb20 with 70,000ks

TD-06 20g 10cm (want to change to 8cm but will see how we go for now) this is the full kit with manifold, 47mm gate (1bar spring) etc

HKS 264 cams

Tomei 555's

GKTech cam gears

HYBRID GT cooler

Just Jap oil cooler

Bosch 023

PFC

Tuning will be done in the next few weeks once i get a Z32 sorted and new SABER gauges fitted to keep an eye on everything and get my hands on the knock sensor im missing :( Looking to improve on the 205rwks @ 14psi with the addition of cams/injectors/Z32.

Will post up results when done :blink:

Cheers Ben

  • 3 weeks later...

an update - only change was from gtr injectors to 550's - got a power run to see how it went (*note not a tune*) and it came back with this...

recorded on a brand new dyno dynamics, twin retarder dyno @ MORPOWA in SA.

**obviosuly AFR's aren't the tidiest...but as i said just to check with the injector change - i reackon it would've had more in it if time was spent tweaking the tune**

post-9092-1229080696_thumb.jpg

Edited by huddy

That was on the 2.4

Unfortunately... not going to be able to find out what it would've made with the tune... as the engine is out now (SOLD)... so one of my last posts for this thread...

will be posting in the RB30 thread if all goes to plan...(not for a while though lol)

Hey guys,

I've been following this thread for quite a while now, and I finally have the chance at cracking 260rwkw. My setup is an oil line and a cold pipe away from running. Anyway, I hope you like it.

Holset HX35 (8 blade, wastegate welded)

Turbonetics Deltagate

6 boost Fwd mount twin scroll manifold

440cc's

NewEngineBay.jpg

NewTurboandManifold.jpg

BestCarEver.jpg

Constructive criticism or complements are appreciated!

Thanks!

-Max

  • 2 weeks later...

I've got a td06 20g 8cm and cant get rid of a boost spike, has a 6boost manifold, had a 38mm tial gate now has 44mm tial gate, exhaust is 3inch straight thru, has anyone else experienced this problem before, my tuner told me at the first tune the manifolds are TO GOOD so thats the reason i upgraded the gate. it boosts to 1 bar then spikes to about 1.5, was going to 2 bar before gate change. would going bigger again fix this problem?

I've got a td06 20g 8cm and cant get rid of a boost spike, has a 6boost manifold, had a 38mm tial gate now has 44mm tial gate, exhaust is 3inch straight thru, has anyone else experienced this problem before, my tuner told me at the first tune the manifolds are TO GOOD so thats the reason i upgraded the gate. it boosts to 1 bar then spikes to about 1.5, was going to 2 bar before gate change. would going bigger again fix this problem?

How big is the spring your running in the 44mm gate? if is the standard spring get a bigger one and see if that will help. And are you sure it's a real Tial? the knock offs are getting hard to tell everyday.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...