Jump to content
SAU Community

Recommended Posts

  • Replies 252
  • Created
  • Last Reply

Top Posters In This Topic

Yeah, I just compared the two and the new one is a LOT bigger...

Don't forget our meeting on the 30th of January, at the shanty hotel (10 east of Wagga on the sturt hyway). This will be to discuss a larger overnight event for rural NSW and some others :D

I went to Narrandera Drags on 23rd. Got there at 10 and was gone by 12. Most sh1tful site I've ever been to. Hot, dry, dusty, hot, extra dusty, the veiwing was bloody woeful, 10 deep at the fence, no grandstands [even temporary ones would have been OK], the track was at 60 degrees away from the spectators, hot, bl00dy dusty, you could hear stuff going on, but you couldn't see diddly squat, dusty, dust everywhere and hot, no shade, and dust.

Carpark was a saltbush stubble wasteland, ground my car out a couple of times, needed my 4WD hilux.

You'd be better off going to Eastern Creek, Heathcote, or Calder, even the old Canberra strip was better [it actually wasn't too bad].

I won't be back, waste of money. And I reckon - going on the number of cars and motrobikes leaving when I was - that I'm not the only one thinking like this.

I agree with Narrandra, I arrived 11:00, was gone by 1. HEAPS of people left when I did. Had my vid carmera there and the footage I have says it all, boring, and far far away.

The drags themselves were good, and there seemed to be some fast cars having a big go (the trail bike lighting the back wheel was gold). The competitors did try and put on a showHowever if they built a dragstrip out here it might be a different story.. the carpark was like Ace Ventura in the 4wd bumping around.

The meeting on the 30th however offers all members flat parking, cool drinks and aircon. :P AND an oppurtunity to catch up with fellow liners.

Meeting at the Shanty pub on Sunday the 30th Jan start at 1200 midday.

The Shanty is located 15 kms East of Wagga Wagga on the Sturt Hyway.

The purpose - to organise a larger scale country event.

We have to think about food, drink, entertainment, and accommodation.

And, we are all different, all ages, and ethnic backgrounds etc etc etc so whatever we do we have to do for everyone.

Confirmed people:

oscar32 (Anthony)

ARM85

Tridentt150v

stolly

Kam

Wild

Sin

Robbie from Tumut, 93 'line

Junee dude

maybe Leeton fella, not sure,

Some time would people be interested in doing a cruise to Ulladulla? Which is halfway between sydney and canberra. Im right in the middle right on the beach. Really nice place here and a big carpark which would be perfect and sometimes cruises come down here to it :D

Some time would people be interested in doing a cruise to Ulladulla? Which is halfway between sydney and canberra. Im right in the middle right on the beach. Really nice place here and a big carpark which would be perfect and sometimes cruises come down here to it :D

Id be keen to cruise up from the far south coast.

Post this on the south coast thread and you may get some interest aswell:)

sweet :D So do yas wana arrange something to here some time?

We could arrange something for in a month or so.

Lets try to get some kind of date which is good for everyone. Im pretty easy so most any times as long as its a weekend.

Im trying to organise a cruise to canberra on 18th feb to go see the butterfly effect with a few mates. Im also goin up that day to get some stuff done to the car. So it can be a day mission or an overnighter - its up to you.

Im keen for a cruise on any weekend really. You name a day and date and we'll most probably be there.

Like I said previously, post this on the south coast thread as there is a few lads from Narooma who might be keen aswell.

:D

Sounds interesting guys :D Keep us posted.

I'll do the 18th though... sounds like a good date :D Crusing to Canberra, then some Braddon and whatever else the night brings..... and the butterfly effect :(

Don't forget the 30th!!!

how far away from ulladulla is the cruise on the 30th? if its not to far i might consider comeing.

Ummm I think its a fair way... According to travelmate.com it's about 440kms,

But you are more than welcome to come along! Bring a carload!!

:rave:

If anyone is interested (ARM) have a look see in my gallery, I've got a heap of the fatz drift day piccies there.

Cheers!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...