Jump to content
SAU Community

Recommended Posts

It usually would mean the seals in the turbo are worn and yes it would mean time for a rebuild.

But also, if you have the engine breather pipe connected and the pipe it joins to runs on an angle down to the turbo make sure it isnt just blow by first.

A friend of mine had oil in his turbo so pulled it off and sent it away to be rebuilt, got it back fitted it and same problem, full of oil again.

Took it back off sent it back again and it was given the all clear.

The actual problem for the oil in the turbo was not the turbo itself but his engine was on the way out and it was spewing a shit load through the breather pipe and as it connected to a pipe that was on an angle down to the turbo it all ran down to the turbo giving the false impression the turbo was cactus.

Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-1125891
Share on other sites

But also, if you have the engine breather pipe connected and the pipe it joins to runs on an angle down to the turbo make sure it isnt just blow by first.

A friend of mine had oil in his turbo so pulled it off and sent it away to be rebuilt, got it back fitted it and same problem, full of oil again.

Took it back off sent it back again and it was given the all clear.

The actual problem for the oil in the turbo was not the turbo itself but his engine was on the way out and it was spewing a shit load through the breather pipe and as it connected to a pipe that was on an angle down to the turbo it all ran down to the turbo giving the false impression the turbo was cactus.

:P

Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-1126113
Share on other sites

  • 5 years later...

Sorry to revive an old post, but during my searching I found this thread, and I think I have the same problem.

I bought some new coilpacks, and after I removed some intercooler piping I found a decent amount of wet engine oil. It's the pipe leading directly into the inlet manifold. See the attached pictures.

I've hit a bit of panic mode, but I'm not too experienced. What do you guys reckon?

Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-5154957
Share on other sites

Also realise that if your car is MAP sensored and you blow an intercooler pipe and then drive around for a while (to get home or something). The oil seals in the turbo will leak some oil out due to a pressure difference between the seal and the compressor housing.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-5154980
Share on other sites

if the cam covers vent to the intake there will always be some oil in the intake, clean it up and drive around for a week then check it again. if the turbo is blown there will be lots of oil in there again. (all cooler pipes and intercooler core)

Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-5155053
Share on other sites

Just checked all my intercooler pipes - they are all on pretty tight!!

Could be your rings as well mate. Have you noticed anything different in the cars driveability? loss of power, stuttering, hesitation, funny idle etc?

Any smoke come out when the cars on & warm/hot out of the oil cap?

mine is having the same issue, i installed a catch can and it helps somewhat but the only way to completely get rid of it it is to rebuild or new motor and get a good baffled catch can installed.

iogj5u.jpg

35mpc00.jpg

mine is a bit more excessive then yours tho.

Link to comment
https://www.sau.com.au/forums/topic/58828-oily-turbo/#findComment-5155189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox) They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox)
    • Inspiration: https://www.nissan-global.com/EN/HERITAGE_COLLECTION/Primera_GT.html    
    • Yeah, hard to find and a pain in the ass to change with the transverse engine. I’ve worked on a GTiR before and it’s not a job I’d ever want to do again. theres a company in South Africa that makes RS3 gearbox adaptors for the AWD SR20 including gearbox mounts, so I could modernise it and go a dual clutch with paddles. For now tho, it ticks all the boxes. Super cheap, can throw the kids and their junk in the back, and SR20 that I can turbo cheaply, a CVT that’s not a dog’s breakfast like the V35, and has 80% interchangeable parts with stuff I can source from the wreckers cheaply…. But it’s still unique. I love the wagon back of the Autech version. It’s cheap enough that I can buy another stock manual FWD Primera with SR20VE, swap the gearbox to the N15 pulsar short gear ratio box, swap out the brakes to the R32 ones I pulled off my 32, register it on club plates and take it racing. $1300 shipping from NZ. Heaps of parts and aftermarket builders for transverse SR20’s in NZ.
    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
×
×
  • Create New...