Jump to content
SAU Community

Recommended Posts

Hi folks,

I just did my first oil change a couple of weeks ago (thanks to sciby's great tute).

I filled the container from the new oil with the old stuff, and it's been sitting on the bedroom floor since.

I obviously can't tip it down the sink to feed the dolphins... can i put it in the bin, or does it have to be deposited somewhere?

thanks.

Link to comment
https://www.sau.com.au/forums/topic/59493-where-to-put-old-oil/
Share on other sites

Jsut chuck it in your normal Bin, just make sure it wont tip out and everything is fine :D

Beh! We live in this world we should treat it better than that.

I'm not by any stretch of the imagination legit but nor am I gonna hurt the environment if I can help it (so.. only when I drive my fossil car).

I usually hunt around for a garage or mechanics that has their waste sitting outside and dump it in with their stuff. Helps me sleep at night knowing it's being disposed of properly AAAND i haven't had to go searching too far to chuck it.

Anyone in sydney, I suggest you take it with you next time you are out at Eastern Creek or WSID, they have recyling oil bins there. Just tip it in and pat yourself on the back for a job well done.

any servo that has a workshop will take it. Also any mechanic should take it. I think they get it picked up for free anyway so just drive round to an industrial area where there are a few mechanics and shouold be fine, most will be happy enough to take it. Sometimes they make you pour it though, so dont spill it on your work clothes. Otherwise the tip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...