Jump to content
SAU Community

Recommended Posts

Hi folks,

I just did my first oil change a couple of weeks ago (thanks to sciby's great tute).

I filled the container from the new oil with the old stuff, and it's been sitting on the bedroom floor since.

I obviously can't tip it down the sink to feed the dolphins... can i put it in the bin, or does it have to be deposited somewhere?

thanks.

Link to comment
https://www.sau.com.au/forums/topic/59493-where-to-put-old-oil/
Share on other sites

Jsut chuck it in your normal Bin, just make sure it wont tip out and everything is fine :D

Beh! We live in this world we should treat it better than that.

I'm not by any stretch of the imagination legit but nor am I gonna hurt the environment if I can help it (so.. only when I drive my fossil car).

I usually hunt around for a garage or mechanics that has their waste sitting outside and dump it in with their stuff. Helps me sleep at night knowing it's being disposed of properly AAAND i haven't had to go searching too far to chuck it.

Anyone in sydney, I suggest you take it with you next time you are out at Eastern Creek or WSID, they have recyling oil bins there. Just tip it in and pat yourself on the back for a job well done.

any servo that has a workshop will take it. Also any mechanic should take it. I think they get it picked up for free anyway so just drive round to an industrial area where there are a few mechanics and shouold be fine, most will be happy enough to take it. Sometimes they make you pour it though, so dont spill it on your work clothes. Otherwise the tip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...